MAINTENANCE
Replacing Forks
WARNING
Ensure that there is sufficient room to turn stand up lift on its side and that floor area is clear of debris. Otherwise, injury to personnel or damage to stand up lift may occur.
NOTE: For this procedure, refer to FIGURE 7.7 and FIGURE 7.8 on page 36.
1.Place the stand up lift on its side.
2.Remove the front or rear caster from the lift. Refer to Replacing Casters/Forks on page 36.
3.Unscrew the existing fork from the base.
4.Install the new fork onto the base.
5.Install the front or rear caster onto the stand up lift. Refer to Replacing Casters/Forks on page 36.
6.Stand the stand up lift back up.
Part No. 1145811 | 37 | Stand Up Lift Model |