MAINTENANCE
Replacing Casters/Forks
Replacing Rear Casters
NOTE: For this procedure, refer to FIGURE 7.7
1.Place the lift on its side.
2.Remove the bolt and locknut that secure the existing rear caster to the fork.
NOTE: The bushing will be loose and may fall out of the caster.
NOTE: Existing bushing will be reused. Examine and replace if worn.
3.Install the new/existing bushing into the new rear caster.
4.Line up the mounting holes in the new rear caster and the fork.
5.Install the bolt through the fork and new rear caster and tighten securely with the locknut.
BaseReplacing Front Casters
NOTE: For this procedure, refer to FIGURE 7.8.
1.Place the lift on its side.
2.Remove the bolt and locknut that secure the existing front caster assembly to the fork.
NOTE: The front caster assembly consists of two casters and a washer in between.
NOTE: The washer will fall out from between | Base | |
the two casters. | ||
|
NOTE: Washer will be reused. Examine and
replace if worn.
Fork
3. | Position the new/existing washer | Locknut |
| between the two new casters. |
|
4. | Line up the mounting holes in the new |
|
| front caster assembly and the fork. | Bolt |
5. | Install the bolt through the fork and the | Washer |
| new front caster assembly and tighten |
|
securely with the locknut.
Front Casters
FIGURE 7.8 Replacing Front Casters
Stand Up Lift Model | 36 | Part No. 1145811 |