SECTION 6—FRONT RIGGINGS
NOTE: For this procedure, refer to FIGURE 6.4.
1.To raise the elevating legrest, the assistant should hold the support tube and raise elevating legrests until the desired height is obtained.
2.To lower the elevating legrest, perform the following:
A.Support user leg with one hand.
B.Push release lever downward with other hand.
C.Gently, lower user leg down and rest against the legrest.
Release
Lever
Support
Tube
FIGURE 6.4 Raising/Lowering the Legrest Assembly
36 | Part No. 1123839 |