SECTION 7—ARMS
SECTION 7—ARMS
WARNING
After ANY adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service verify that On/Off switch on the joystick is in the Off position.
Adjusting Armrest Height
WARNING
Make sure the height adjustment lever is in the locked position before using the wheelchair.
NOTE: For this procedure, refer to FIGURE 7.1.
1.Unlock the armrest by flipping the height adjustment lever on the top front of the armrest to the up (horizontal) position.
2.Adjust armrest to one of five positions.
NOTE: Height adjustment lever MUST be in the unlocked position when placing armrest into the arm assembly.
3.Lock the armrest by pressing the height adjustment lever into the down (vertical) position when the desired armrest height is achieved.
4.Repeat STEPS
| Armrest | |
Locked | Height Adjustment Lever | |
(Vertical) | ||
|
Unlocked
(Horizontal)
FIGURE 7.1 Adjusting Armrest Height
Part No. 1123839 | 37 |