Invacare R51LXP, R50LX manual Reaching and Bending Backward

SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS

Reaching and Bending - Backward

WARNING

DO NOT lean over the top of the back upholstery. This will change your center of gravity and may cause you to tip over.

NOTE: For this procedure, refer to FIGURE 3.3.

1.Position wheelchair as close as possible to the desired object.

2.Point the front casters as far forward as possible to create the longest possible wheelbase.

3.Reach back only as far as your arm will extend without changing your sitting position.

FIGURE 3.3 Reaching and Bending - Backward

Part No.1106645 22 Nutron® Series