Invacare R50LX, R51LXP manual CLUTCH/MOTOR Lock, Engaging/Disengaging the Clutches

Page 65

SECTION 13—CLUTCH/MOTOR LOCK

SECTION 13—CLUTCH/MOTOR LOCK

WARNING

After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may result.

Engaging/Disengaging the Clutches

WARNING

DO NOT engage or disengage the clutches until the power is off.

NOTE: For this procedure, refer to FIGURE 13.1.

The clutch engagement/disengagement allows free‐wheeling or joystick controlled operation. Free‐wheeling allows an attendant to maneuver the wheelchair without power. To engage/disengage the clutches:

1. Locate the clutch handles on motors as shown in FIGURE 13.1.

CAUTION

If clutch handles are forced to engage in the wrong direction as shown in FIGURE 13.1, the motors will be damaged and will need to be replaced.

Top View Of Wheelchair

 

NOTE: NEVER force clutch

Disengaged (Toward rear wheels)

handles in these directions.

Clutch

Engaged (Toward

Clutch Handle

Handle

rear of wheelchair)

 

FIGURE 13.1 Engaging/Disengaging the Clutches

2.Perform one (1) of the following ‐

To Engage: turn the clutch handles until they are pointing toward the rear of the wheelchair. NEVER try to turn the clutch handles toward the front of the wheelchair.

Nutron® Series

65

Part No.1106645

Image 65
Contents Nutron Series Nutron Series Part No.1106645 Table of Contents Wheelchair Operation UPHOLSTERY/SEAT Positioning Strap Complete and mail the form on the next Register Your ProductProduct Registration Form Fold here Cut Along Line Wheelchair TIE-DOWN Restraints and Seat Restraints Special NotesNutron R50LX, R51, R51LX, R51LXP Typical Product ParametersOperating Information Repair or Service InformationGeneral Guidelines Tire Pressure Electrical AccessoriesCharging Batteries Grounding InstructionsBatteries Rain Test Weight TrainingWeight Limitation EMI Information EMI Information Safety/Handling of Wheelchairs SAFETY/HANDLING of WheelchairsStability and Balance Coping With Everyday ObstaclesTilting Curbs TiltingStairways Escalators Transferring To and From Other SeatsReaching, Leaning and Bending Forward Percentage of Weight DistributionReaching and Bending Backward Reaching and Bending BackwardSafety Inspection Checklists Safety INSPECTION/TROUBLESHOOTINGInspect/Adjust Initially Inspect/Adjust WeeklyInspect/Adjust Periodically Inspect/Adjust MonthlySymptom Probable Cause Solutions Troubleshooting GuideDON’T Checking Battery Charge LevelOperating the Wheelchair Turning the Power On/OffWheelchair Operation Using the Horn Using the Joystick to Drive the ChairSPJJoystick Switches and Indicators Display Description Definition Installing Installing/Removing the FootrestsFront Riggings RemovingModel PW93, PW93E, and PW93ST Footrests Adjusting the Footrest HeightModel 93M, 904A, PAL4A, and PAS4A Footrests Replacing Heel LoopsRaising/Lowering Elevating Legrests Installing/Removing Elevating LegrestsAdjusting Calfpads Adjusting/Replacing Telescoping Front Rigging SupportAdjusting/Replacing Telescoping Front Rigging Support Arms Adjusting Armrest HeightClothing Guard Using Swing-Back ArmsArmrest Pad Removing/Installing Armrest Removing/Installing ArmrestBack Adjusting the Back HeightChanging the Back Angle Changing the Back Angle Replacing Back Upholstery UPHOLSTERY/SEAT Positioning StrapReplacing Seat Upholstery Replacing Back Upholstery Replacing Seat Positioning StrapReplacing Seat Positioning Strap Preparing the Joystick For Use JoystickRepositioning the Joystick Repositioning the JoystickCasters Adjusting ForksBatteries Using the Proper BatteriesUsing the Proper Batteries Recommended Battery TypesInstalling/Removing the Battery Boxes Installing/Removing the Battery Boxes Installing/Removing the Battery TrayInstalling/Removing the Battery Tray Place batteries into battery box bottom Direct Mount Method Connecting Battery CablesBatteries Connecting Battery Cables Direct Mount Method Connecting Battery Cables Battery Clamp Method Battery Clamp MethodInstalling Battery Clamp Cover Connecting Battery Cables -Battery Clamp Method Replacing the Battery Box Retaining Strap 10 Replacing the Battery Box Retaining Strap Cleaning Battery TerminalsCharging Batteries When To Charge BatteriesConnecting the Battery Charger Description and Use of Battery ChargersEngaging/Disengaging the Clutches CLUTCH/MOTOR LockFour Pole Motors Disengaging/Engaging the Motor Lock Levers R51LXP OnlyWheel Locks Installing/Adjusting/Using the Wheel LocksInstalling/Adjusting Installing/Adjusting/Using the Wheel Locks UsingANTI-TIPPERS Installing/Removing the Anti-TippersInstalling/Removing the Anti-Tippers Unfolding/Folding the Wheelchair TransportingTransporting the Nutron Transporting the Nutron Transporting Transporting Limited Warranty USA