INSTALLING THE SEAT J BRACKETS (FIGURE 9)
1.Position the ContourU seat between the seat rails to determine the approximate mounting position of the J brackets to ensure the appropriate height setting.
2.Align two (2) of four (4) mounting holes of the J bracket with two (2) of five (5) mounting holes on the L bracket as shown in FIGURE 9.
3.Using two (2) mounting screws and locknuts, secure the J bracket to the L bracket. Se- curely tighten mounting hardware.
4.Repeat STEPS
5.Install the ContourU seat. Refer to INSTALLING/REMOVING THE CONTOUR U SEAT- ING SYSTEM SEAT in this instruction sheet.
6.Position the user into the wheelchair to determine If seat height adjustments are needed to properly fit the ContourU seat to the user. Refer to the wheelchair owner's manual.
ContourU Back
J Bracket
Locknuts |
|
|
L Brackets |
| Mounting |
| Mounting Holes | |
| Screw | |
|
|
FIGURE 9 - INSTALLING THE SEAT J BRACKETS
12