INSTALLING/REMOVING THE CONTOUR U SEATING SYSTEM SEAT (FIGURE 10)
Installing
1.Ensure that the twist release clamps are in the OPEN position as shown in DETAIL “A” of FIGURE 10.
2.Position the rear J brackets securely into the fixed release clamps as shown in FIGURE 10.
3.Position the front J brackets onto the seat rail just below the twist release clamp.
4.Rotate the twist release clamps to the CLOSED position as shown in DETAIL “B” of FIGURE 10.
Removing
1.Rotate the two (2) twist release clamps to the OPEN position as shown in DETAIL “B” of FIGURE 10.
2.tilt the front of the ContourU seat up away from the seat rails.
3.Puilling UP, remove the ContourU seat from the seat rails.
DETAIL "A" |
| DETAIL "B" |
ContourU Seat (Front) | Seat Rails | ContourU Seat (Front) |
|
J Brackets
|
|
| J Brackets | |
Fixed Release |
| Twist Release Clamps. | Fixed Release Clamp | Twist Release Clamps. |
Clamp | Seat Rails | (OPEN Position) |
| (CLOSED Position) |
FIGURE 10 - INSTALLING/REMOVING THE CONTOUR U SEATING
SYSTEM SEAT
13