Invacare OCMK01, OCMK78 operating instructions Installing the Back J Brackets Figure

Page 5

INSTALLING THE BACK J BRACKETS (FIGURE 3)

1.Position the ContourU back between the back canes to determine the approximate mounting position of the J brackets to obtain the desired depth.

2.Align two (2) of four (4) mounting holes of the J bracket with two (2) of five (5) mounting holes on the L bracket as shown in FIGURE 3.

3.Using two (2) mounting screws and locknuts, secure the J bracket to the L bracket. Se- curely tighten mounting hardware.

4.Repeat STEPS 2-3 with three (3) remaining brackets.

ContourU Back

J Bracket

Mounting Screw

Mounting Holes

L Brackets

Locknuts

FIGURE 3 - INSTALLING THE BACK J BRACKETS

5

Image 5

Contents Safety Summary Important Information Installation InformationDetail B Detail aFront WheelchairWood Back Installing the Back L Brackets FigurePAN Back Installing the Back J Brackets Installing the Back J Brackets FigureDetail a Detail B INSTALLING/REMOVING the Contour U BackDepth Adjustments Adjusting the Contour U Back Depth FigureAdjusting the Contour U Seating System Back Angle Adjusting the Contour U Seating System Back Angle FigurePage Rear Front WheelchairInstalling the Seat L Brackets Installing the Seat L Brackets FigureInstalling the Seat J Brackets Installing the Seat J Brackets FigureINSTALLING/REMOVING the Contour U Seating System Seat Figure Adjusting the Contour U Seating System Seat Height Adjusting the Contour U Seat Height FigureAdjusting the Contour U Seating System Seat Angle Adjusting the Contour U Seating System Seat Angle FigureCanada One Invacare Way