INSTALLING THE BACK L BRACKETS (FIGURE 2)
NOTE: When mounting the L brackets to the wood backed ContourU cushion the L brackets may be reversed to allow for greater seat depth adjustments as shown in DETAIL “A” of FIGURE 2.
1.Position the ContourU Back between the back canes and determine the mounting posi- tions for the four (4) L brackets to obtain the desired back depth.
2.If mounting L bracket to a pan back, pull to remove the ContourU cushion from the pan back.
3.Align L bracket with the edge of the seat back and two (2) desired mounting holes as shown in FIGURE 1.
4.Perform one (1) of the following:
A.PAN BACK: Using a backing plate and two (2) mounting screws, secure the L bracket to the pan back.
B.WOOD BACK: using two (2) mounting screws secure the L bracket to the wood back.
5.Repeat STEPS
6.If mounting L bracket to a pan back, reinstall the ContourU cushion onto the back pan.
PAN BACK
NOTE: ContourU cushion |
|
not shown. | Backing Plate |
| |
Edge of the Seat Back |
|
Mounting Holes |
|
L Bracket |
|
Mounting Screws
Pan Back
WOOD BACK
Edge of the Seat Back
Mounting Holes
LBracket
Mounting Screws
DETAIL "A"
LBracket (Reversed)
Mounting
Screws
Mounting
Holes
FIGURE 2 - INSTALLING THE BACK L BRACKETS
4