SECTION
REMOVING/INSTALLING THE DRIVE WHEELS
WARNING
Maintain tire pressure at 30 p.s.i.
NOTE: For this procedure, refer to FIGURE 10.3.
REMOVING
1.Disengage the motors. Refer to Engaging/Disengaging the Motors on page 39.
2.Push and hold the
3.Repeat STEPS
INSTALLING
1.Align drive wheel axle with the wheelchair frame.
2.Push and hold the
3.Engage the motor. Refer to Engaging/Disengaging the Motors on page 39.
4.Repeat STEPS
WARNING
Pull the drive wheel to ensure that the drive wheel is locked in place before operat- ing the wheelchair - otherwise serious injury or damage may occur.
SIDE VIEW | Motor Engagement Handle |
in the Disengaged Position | |
Drive Wheel | |
Button |
|
TOP VIEW
Wheelchair | Drive Wheel Axle |
Frame |
Drive Wheel
FIGURE 10.3 - REMOVING/INSTALLING THE DRIVE WHEELS
At’m | 42 | Part No. 1125035 |