Omega Engineering #M3350/0101 manual Edit Menu, View Menu, Controller Menu

CN8-SW™UserÕs Guide

Edit Menu

Function	Purpose	Section
Operator	Allows ÒSuper UsersÓ (CN8-SW Administrators) to set up	3.5
	operator login accounts and specify what CN8-SW features	and
	each operator will be allowed to use.	3.6
Password	Enables operators to change their own passwords.	3.4

View Menu

Function Purpose

Section

Graphic

Display images of controller front panels on main CN8-SW display.

--

Text	Display a list of controllers, their setpoints, and process	--
	variables on the main CN8-SW display.
Toolbar	Turn on and turn off display of CN8-SW toolbar.	--
Status Bar	Turn on and turn off display of CN8-SW status bar at the	--
	bottom of the window. The right side of this status bar shows
	what address number is being checked when the Option
	menu ÒStart Find ControllersÓ function is used. During normal
	operation the left side of the status bar displays the name of
	the controller that the CN8-SW software is polling.

Controller Menu

Before you can use a function marked with an asterisk (*) below, you must select a controller on the main graphic display (or text view) by using the left button to click on the controllerÕs image (or name in text view).

Function	Purpose	Section
Add *	Establish communication with a single controller. To use	4.4.3
	this function you must know the controllerÕs network
	address.
Delete *	Sever communication with a single controller. Once this	4.5
	function has been used and the .MCS file saved, the CN8-
	SW computer will not be able to communicate with the
	controller until you use the Add function on this menu, or the
	Start Find Controllers function on the Options menu.
Delete All	Sever communication with all controllers. Once this function	4.5
	has been used and the .MCS file saved, the CN8-SW
	computer will not be able to communicate with the
	controllers until you use the Add function on this menu, or
	the Start Find Controllers function on the Options menu.
Select All	Reserved for future use.	--
Unselect All	Reserved for future use.	--
Configure *	Access the window used to change the name or network	4.7
	address of a controller with which the CN8-SW computer
	can communicate.

1-8