CN8-SW™ UserÕs Guide
9.3.2 Holding (Pausing) Recipe Execution
To hold execution of a CN8-SW recipe:
1.While logged in as MULTI (or another user with View/Change Parameter privileges), select Ramp/Soak Hold. The Recipe Control window will open.
2.The window lists all the recipes being run under the direction of
A recipe may appear on the list in the left pane more than once. This means that you started to run the recipe on different controllers (or sets of controllers) at different times. Each of these occurrences of a recipe on the list is referred to as an ÒinstanceÓ of the recipe.
To see on which controller(s) you are currently executing an instance of a recipe,
click on the name of the recipe. The controllers running the selected instance of the recipe that are not already on hold will be listed in the right pane.14
3.Select the instance of the recipe to be held.
4.Select the controllers to be held. (You can hold down the Shift key to select multiple controllers that are together on the list, or hold down the Control key to select multiple controllers that are scattered on the list.)
5.Click on Hold. Execution of the selected instance of the
Execution of the selected instance of the recipe will be held for the selected controllers until you resume execution as described in 9.3.3, or stop (terminate) execution as described in 9.3.4.
14If all controllers on which you are running the selected recipe instance are already held, then no controllers will be listed in the right pane.