Omega Engineering #M3350/0101 manual Table of Contents

			Table of Contents
1.	Introduction			1-1
	1.1	Features		1-1
	1.1.1		Transforms a PC into an Operator Station	1-1
	1.1.2		Graphical Interface	1-2
	1.1.3		Automated Ramp and Soak Cycles	1-3
	1.1.4		Logging	1-3
	1.1.5		Storing and Loading Configuration Parameter Sets	1-3
	1.1.6		Local Alarms	1-4
	1.2	Hardware and Software Requirements		1-4
	1.2.1		CN8-SW Computer	1-4
	1.2.2		Controllers	1-4
	1.3	Overview of Setup Tasks		1-5
	1.4	Overview of CN8-SW Menus		1-7
	1.4.1		Availability of Functions	1-7
	1.4.2		Menu Convention Used in This Manual	1-11
	1.5	General Instructions for Using CN8-SW Windows		1-11
2. Wiring the Network and Connecting the Computer				2-1
	2.1	Introduction		2-1
	2.2	Connecting Controllers and the Computer to the Network		2-2
	2.2.1		Introduction	2-2
	2.2.2		RS-232 Interface	2-2
	2.2.3		RS-485 Network	2-3
3.	Installing the Software and Logging In			3-1
	3.1	Installing the Software		3-1
	3.2	Starting the Software		3-3
	3.3	Logging In to CN8-SW Using the Default Account		3-4
	3.4	Changing the Password for the Default Account		3-5
	3.5	Setting Up Operator Accounts		3-6
	3.5.1		Permissions Available	3-6
	3.5.2		Procedure	3-7
	3.6	Editing an Operator Account		3-8
	3.7	Deleting an Operator Account		3-8
	3.8	Logging Out of the CN8-SW Application		3-8
4. Establishing Communication with Controllers				4-1
	4.1	Introduction		4-1

4.2Configuring Communication Parameters and Assigning Network Addresses in

Controllers 4-2

900M048U00 REVISION ÒBÓ © Omega Engineering i