SECTION
Radio Frequency Interference
This equipment has been tested and found to comply with EMC limits specified by IEC/ EN
Other devices may experience interference from even the low levels of electromagnetic emissions permitted by the above standards. To determine if the emissions from the XPO2 are causing the interference, turn the XPO2 Off. If the interference with the other device(s) stops, then the XPO2 is causing the interference. In such rare cases, interference may be reduced or corrected by one of the following measures:
•Reposition, relocate, or increase the separation between the equipment.
•Connect the equipment into an outlet on a circuit different from that to which the other device(s) is connected.
XPO2™ | 8 | Part No 1150748 |