Panasonic AWHE50HN, AWHE50SN QqChanging the format, Format change check screen, Format Set screen

Page 45

Setting the menu items

qqChanging the format

When the format is changed on the Output screen from its current setting, the Format change check screen appears.

Format change check screen

Format

Do you want to

set Format(1080i)?

CANCEL

O.K.

The format (1080i, 720p or 480i) to be set is displayed within the parentheses on the screen.

When the cursor is moved to “O.K.” on the format change check screen and the setting is entered, the Format Set screen appears for 5 seconds, and the format is changed.

After the format has been changed, the display returns to the Output screen.

Format Set screen

Format(1080i)

Set

Format unchanged screen

Format

unchanged

The format (1080i, 720p or 480i) to be set is displayed within the parentheses on the screen.

When the cursor is moved to “CANCEL” on the format change check screen and the setting is entered, the Format unchanged screen appears for 5 seconds, the format is left unchanged, and the display returns to the Output screen.

45

Image 45

Contents AW‑HE50SN Contents Before use WwOverviewWwConcerning the Operating Instructions WwRequired personal computer environment WwTrademarks and registered trademarksWwAbout copyright and licence WwNetwork security WwDisclaimer of warrantyBasic shooting operations Select the shooting modeWwTurning the power on How to turn the power on and offSet the Operate switch on the controller to on When the AW‑RP50 is connectedSet the Operate switch on the controller to OFF WwTurning the power offSelecting the units Selecting the shooting modes scene filesWwTypes of shooting modes WwHow to select the shooting mode Turn the jog dial main Press the Menu buttonPress the OK button Press the OK button againQqSwitching the direction or zoom speed QqUsing the zoom functionShooting QqChanging the camera’s directionUnit does not move Lens focus is not adjusted automaticallyMultiple color bands color bars are displayed Menu screen is displayedMore advanced operations Manual shooting WwManually adjusting the focusWwManually adjusting the iris Press the Shutter button and turn its lamp on WwManually adjusting the shutter speedWwManually adjusting the gain Press the OFF, LOW or HI buttonPress the Gain button to turn off its lamp Position may occur Preset memoriesSet the memory recording mode Set to the memory recording modeHold down the Reset button Hold down the Memory buttonWhen the AW‑RP555 is connected White balance adjustment WwWhite balance adjustmentQqAutomatic adjustment AWB AWB A or AWB B Press the AWC button Press the SET button for 2 secondsQqAuto tracking white adjustment ATW WwBlack level master pedestal adjustment Black level master pedestal adjustmentPress the M/IRIS button Press the IRIS - buttonPress the Iris button several times to turn off its lamp Genlock adjustment AW‑HE50S only WwGenlock adjustmentQqHorizontal phase adjustment Press the Mode button QqColor phase adjustmentGenlock adjustment AW‑HE50S only Table of operations Basic operationsChanging Press the  or  button to change the setting Jog dial R Jog dial mainPress the Menu button for 2 seconds to exit the camera menu QqProcedure for camera menu operation AW‑RP655Mode button lights up at the BAR setting Press the Menu button of the AW‑RP555 for 2 seconds QqProcedure for camera menu operation AW‑RP555Perform one of the following steps to select the menu item Press the Item buttonCamera OSD QqProcedure for camera menu operation AW‑RP50Setting the menu items WwSetting the menu itemsWwTop Menu WwCamera screen When Manual1 to 3 is selected WwCamera screen When FullAuto is selectedWwContrast screen WwPicture 1/2 screen WwSystem screen WwPicture 2/2 screenWwOutput screen WwGenlock screen AW‑HE50S onlyRGB-NOR Format change check screen QqChanging the formatFormat Set screen Format unchanged screenWwOther 1/2 screen Wireless Control Disable, Enable Tally Enable Disable, EnableWwOther 2/2 screen OSD Off With Tally Off, OnWwFirmware Version screen WwMaintenance screenMenu settings unchanged screen Menu settings initialized screenQqConcerning initialization Initialize screenMenu item table Menu Factory setting Selection items FullAutoWeb setting screen WwMenu operations Control Setup Power on button / Standby button  Control button / Setup button Zoom  Focus WwControl screen Preset  Control pad and its buttons Brightness WwSetup screen QqBasic screen Basic button Image  Image Image adjust Preset positionQqImage screen Image adjust screen  Scene FullAuto, Manual1, Manual2, Manual3  Contrast Contrast Mode Auto, ManualAWB  Picture Chroma Level -3 to +3Preset position setting screen  Preset  Zoom  Limitation Setting  Genlock AW‑HE50S only  Output ENH setting instead Other QqUser mng Host auth. screen  Host auth  IP address Host check QqServer QqNetwork Network screen  IP networkIP address Default gateway Subnet maskPort numbers already used 20, 21, 23, 25, 42, 53, 67, 68  Access interval  Password 0 to 32 half-size charactersDdns screen  Host name 1 to 64 half-size characters Community 0 to 32 half-size characters Snmp screen Location 0 to 32 half-size characters  Contact 0 to 255 half-size characters Error description QqMaintenanceSystem log screen  Time & dateUpgrade screen Enter the software version in the xxxxx part  Reset to the default Except the network settings Default reset screen Load the default Html files setup menu  Reset to the default and load the default Html filesBack up screen  Download Upload Other screen NTP-related error displays DDNS-related error displaysLogin-related displays Category Display Description of errorLimiters WwSetting the limiters Setting/releasing the limitersWwBasic limiter operations Press one of the CAM1 to CAM4 buttons to select the unitWwReleasing the limiters WwResetting the limitersPp Releasing the upper limit position of the movement range Pp Releasing the lower limit position of the movement rangeSafe mode WwConcerning the safe modeTrouble-triggered safe mode CPU WwSystem requirements for a PCWwPrecautions when using Windows Vista SymptomSolution Symptom QqRestrictions Restriction When activating audio on the web browserWwPrecautions when using Windows Restriction 2 When using Windows 7 with some products Restriction 1 On the setup pages for some productsPanasonic Solutions Company

Related manuals

Manual 90 pages 45.33 Kb