Panasonic AWHE50SN, AWHE50HN manual WwMaintenance screen, WwFirmware Version screen

Page 48

Setting the menu items

wwMaintenance screen

Maintenance

Firmware Version

Initialize

Return

Firmware Version

This is selected to display the Firmware Version screen on which to check the version of the firmware used.

Initialize

This is selected to display the Initialize screen on which to initialize the camera’s settings.

For details on operation, refer to “Concerning initialization” on page 49.

Return

Use this to return to the previous menu.

wwFirmware Version screen

Firmware

Version

CPU Software

 

Camera Main

V01.00

Pan/Tilt

V01.00

Network

V01.00

PLD

CameraV01.00

OutputV01.00

Return

CPU Software Camera Main

This is selected to display the software version of the camera unit.

CPU Software Pan/Tilt

This is selected to display the software version of the pan-tilt unit.

CPU Software Network

This is selected to display the software version of the network unit.

PLD Camera

This is selected to display the PLD version of the camera unit.

PLD Output

This is selected to display the PLD version of the output unit.

Return

Use this to return to the previous menu.

48

Page 47 Page 49
Image 48
Page 47 Page 49
Contents AW‑HE50SN Contents Before use WwOverviewWwConcerning the Operating Instructions WwRequired personal computer environment WwTrademarks and registered trademarksWwAbout copyright and licence WwDisclaimer of warranty WwNetwork securitySelect the shooting mode Basic shooting operationsHow to turn the power on and off WwTurning the power onSet the Operate switch on the controller to on When the AW‑RP50 is connectedWwTurning the power off Set the Operate switch on the controller to OFFSelecting the units Selecting the shooting modes scene filesWwTypes of shooting modes WwHow to select the shooting mode Press the Menu button Turn the jog dial mainPress the OK button Press the OK button againQqUsing the zoom function QqSwitching the direction or zoom speedShooting QqChanging the camera’s directionLens focus is not adjusted automatically Unit does not moveMultiple color bands color bars are displayed Menu screen is displayedMore advanced operations WwManually adjusting the focus Manual shootingWwManually adjusting the iris WwManually adjusting the shutter speed Press the Shutter button and turn its lamp onWwManually adjusting the gain Press the OFF, LOW or HI buttonPress the Gain button to turn off its lamp Preset memories Position may occurSet to the memory recording mode Set the memory recording modeHold down the Reset button Hold down the Memory buttonWhen the AW‑RP555 is connected White balance adjustment WwWhite balance adjustmentQqAutomatic adjustment AWB AWB A or AWB B Press the SET button for 2 seconds Press the AWC buttonQqAuto tracking white adjustment ATW Black level master pedestal adjustment WwBlack level master pedestal adjustmentPress the M/IRIS button Press the IRIS - buttonPress the Iris button several times to turn off its lamp Genlock adjustment AW‑HE50S only WwGenlock adjustmentQqHorizontal phase adjustment QqColor phase adjustment Press the Mode buttonGenlock adjustment AW‑HE50S only Basic operations Table of operationsChanging Press the  or  button to change the setting Jog dial main Jog dial RQqProcedure for camera menu operation AW‑RP655 Press the Menu button for 2 seconds to exit the camera menuMode button lights up at the BAR setting QqProcedure for camera menu operation AW‑RP555 Press the Menu button of the AW‑RP555 for 2 secondsPerform one of the following steps to select the menu item Press the Item buttonQqProcedure for camera menu operation AW‑RP50 Camera OSDSetting the menu items WwSetting the menu itemsWwTop Menu WwCamera screen When FullAuto is selected WwCamera screen When Manual1 to 3 is selectedWwContrast screen WwPicture 1/2 screen WwPicture 2/2 screen WwSystem screenWwGenlock screen AW‑HE50S only WwOutput screenRGB-NOR QqChanging the format Format change check screenFormat Set screen Format unchanged screenWwOther 1/2 screen Tally Enable Disable, Enable Wireless Control Disable, EnableWwOther 2/2 screen OSD Off With Tally Off, OnWwMaintenance screen WwFirmware Version screenMenu settings initialized screen Menu settings unchanged screenQqConcerning initialization Initialize screenMenu Factory setting Selection items FullAuto Menu item tableWeb setting screen Control Setup WwMenu operations Control button / Setup button  Power on button / Standby buttonWwControl screen  Zoom  Focus Preset  Control pad and its buttons Brightness WwSetup screen QqBasic screen Basic button Image  Image Image adjust Preset positionQqImage screen Image adjust screen  Contrast Contrast Mode Auto, Manual  Scene FullAuto, Manual1, Manual2, Manual3 Picture Chroma Level -3 to +3 AWBPreset position setting screen  Preset  Zoom  Limitation Setting  Genlock AW‑HE50S only ENH setting instead  Output Other QqUser mng Host auth. screen  Host auth  IP address Host check QqServer QqNetwork Network screen  IP networkIP address Default gateway Subnet maskPort numbers already used 20, 21, 23, 25, 42, 53, 67, 68  Password 0 to 32 half-size characters  Access intervalDdns screen  Host name 1 to 64 half-size charactersSnmp screen  Community 0 to 32 half-size characters Location 0 to 32 half-size characters  Contact 0 to 255 half-size charactersQqMaintenance  Error descriptionSystem log screen  Time & dateUpgrade screen Enter the software version in the xxxxx part Default reset screen  Reset to the default Except the network settings Load the default Html files setup menu  Reset to the default and load the default Html filesBack up screen  Download Upload Other screen DDNS-related error displays NTP-related error displaysLogin-related displays Category Display Description of errorLimiters Setting/releasing the limiters WwSetting the limitersWwBasic limiter operations Press one of the CAM1 to CAM4 buttons to select the unitWwResetting the limiters WwReleasing the limitersPp Releasing the upper limit position of the movement range Pp Releasing the lower limit position of the movement rangeSafe mode WwConcerning the safe modeTrouble-triggered safe mode WwSystem requirements for a PC CPUWwPrecautions when using Windows Vista SymptomSolution Symptom Restriction When activating audio on the web browser QqRestrictionsWwPrecautions when using Windows Restriction 1 On the setup pages for some products Restriction 2 When using Windows 7 with some productsPanasonic Solutions Company
Related manuals
Manual 90 pages 45.33 Kb

AWHE50SN, AWHE50HN specifications

The Panasonic AW-HE50HN is a state-of-the-art PTZ (Pan-Tilt-Zoom) camera designed for professional video production and broadcasting. This versatile camera is favored for its compact design and advanced features, making it an excellent choice for a variety of applications such as live events, education, houses of worship, and corporate environments.

One of the primary highlights of the AW-HE50HN is its impressive imaging capabilities. Equipped with a 1/2.3-inch sensor, it delivers high-definition video quality up to 1080p with a remarkable dynamic range. The camera features a powerful 20x optical zoom lens that allows users to capture distant subjects with clarity while maintaining the quality of the image. This feature is particularly valuable in large venues where the camera might be located far from the action.

The AW-HE50HN also stands out for its superb low-light performance. With a minimum illumination requirement of just 1.6 lux in color mode and 0.3 lux in black and white mode, this camera excels in dimly lit environments, ensuring that every important moment is recorded in high detail.

Networking capabilities are another key aspect of the AW-HE50HN. It supports various streaming protocols, including RTSP and RTMP, allowing for seamless integration into existing networks. This feature makes it ideal for live streaming events directly to the web or for remote monitoring via IP networks. Additionally, the camera can be controlled remotely, offering great flexibility for operators managing multiple cameras during broadcasts.

In terms of usability, the AW-HE50HN is designed with real-time control in mind. It includes multiple control interfaces such as RS-232, RS-422, and LAN, giving operators the freedom to choose the best method for their setup. The camera’s robust built-in protocols ensure compatibility with a variety of third-party controllers, making it a versatile addition to any video production setup.

The AW-HE50HN also boasts a number of special features, including face detection technology and various image stabilization options, which help enhance production quality. Its compact and lightweight design allows for easy installation in any environment, whether it's mounted on a wall, placed on a tripod, or integrated into a more complex studio setup.

In conclusion, the Panasonic AW-HE50HN is a sophisticated and adaptable camera that combines advanced imaging technology with versatile connectivity and remote control options. Its ability to deliver high-quality video in diverse lighting conditions, along with its ease of integration into video production workflows, makes it a preferred choice for professionals in the field. Whether for broadcasting, live events, or corporate use, the AW-HE50HN stands out as a reliable and powerful solution.
Top Page Image Contents