Panasonic AWHE50HN, AWHE50SN manual QqNetwork, Network screen  IP network, IP address

Page 69

Web setting screen

qqNetwork

This screen has items that relate to the network settings, DDNS (Dynamic DNS) and SNMP (Simple Network Management Protocol).

It consists of the three tabs of “Network”, “DDNS” and “SNMP”.

Network screen

IP network

DHCP

<Initial setting: Off>

Whether the DHCP function is to be used is set by selecting “On” or “Off” here. Set the DHCP server in such a way that the same IP address cannot be used by PCs without the DHCP function or by other network cameras. For details on the server settings, consult your network administrator.

IP address

<Initial setting: 192.168.0.10>

Input the unit’s IP address here when the DHCP function is not going to be used. Input an address that will not duplicate an existing IP address which has been set for a PC or another network camera.

ppMultiple IP addresses cannot be used even when the DHCP function is used.

For details on the DHCP server settings, consult your network administrator.

69

Page 68 Page 70
Image 69
Page 68 Page 70
Contents AW‑HE50SN Contents Before use WwOverviewWwConcerning the Operating Instructions WwRequired personal computer environment WwTrademarks and registered trademarksWwAbout copyright and licence WwNetwork security WwDisclaimer of warrantyBasic shooting operations Select the shooting modeWwTurning the power on How to turn the power on and offSet the Operate switch on the controller to on When the AW‑RP50 is connectedSet the Operate switch on the controller to OFF WwTurning the power offSelecting the units Selecting the shooting modes scene filesWwTypes of shooting modes WwHow to select the shooting mode Turn the jog dial main Press the Menu buttonPress the OK button Press the OK button againQqSwitching the direction or zoom speed QqUsing the zoom functionShooting QqChanging the camera’s directionUnit does not move Lens focus is not adjusted automaticallyMultiple color bands color bars are displayed Menu screen is displayedMore advanced operations Manual shooting WwManually adjusting the focusWwManually adjusting the iris Press the Shutter button and turn its lamp on WwManually adjusting the shutter speedWwManually adjusting the gain Press the OFF, LOW or HI buttonPress the Gain button to turn off its lamp Position may occur Preset memoriesSet the memory recording mode Set to the memory recording modeHold down the Reset button Hold down the Memory buttonWhen the AW‑RP555 is connected White balance adjustment WwWhite balance adjustmentQqAutomatic adjustment AWB AWB A or AWB B Press the AWC button Press the SET button for 2 secondsQqAuto tracking white adjustment ATW WwBlack level master pedestal adjustment Black level master pedestal adjustmentPress the M/IRIS button Press the IRIS - buttonPress the Iris button several times to turn off its lamp Genlock adjustment AW‑HE50S only WwGenlock adjustmentQqHorizontal phase adjustment Press the Mode button QqColor phase adjustmentGenlock adjustment AW‑HE50S only Table of operations Basic operationsChanging Press the  or  button to change the setting Jog dial R Jog dial mainPress the Menu button for 2 seconds to exit the camera menu QqProcedure for camera menu operation AW‑RP655Mode button lights up at the BAR setting Press the Menu button of the AW‑RP555 for 2 seconds QqProcedure for camera menu operation AW‑RP555Perform one of the following steps to select the menu item Press the Item buttonCamera OSD QqProcedure for camera menu operation AW‑RP50Setting the menu items WwSetting the menu itemsWwTop Menu WwCamera screen When Manual1 to 3 is selected WwCamera screen When FullAuto is selectedWwContrast screen WwPicture 1/2 screen WwSystem screen WwPicture 2/2 screenWwOutput screen WwGenlock screen AW‑HE50S onlyRGB-NOR Format change check screen QqChanging the formatFormat Set screen Format unchanged screenWwOther 1/2 screen Wireless Control Disable, Enable Tally Enable Disable, EnableWwOther 2/2 screen OSD Off With Tally Off, OnWwFirmware Version screen WwMaintenance screenMenu settings unchanged screen Menu settings initialized screenQqConcerning initialization Initialize screenMenu item table Menu Factory setting Selection items FullAutoWeb setting screen WwMenu operations Control Setup Power on button / Standby button  Control button / Setup button Zoom  Focus WwControl screen Preset  Control pad and its buttons Brightness WwSetup screen QqBasic screen Basic button Image  Image Image adjust Preset positionQqImage screen Image adjust screen  Scene FullAuto, Manual1, Manual2, Manual3  Contrast Contrast Mode Auto, ManualAWB  Picture Chroma Level -3 to +3Preset position setting screen  Preset  Zoom  Limitation Setting  Genlock AW‑HE50S only  Output ENH setting instead Other QqUser mng Host auth. screen  Host auth  IP address Host check QqServer QqNetwork Network screen  IP networkIP address Default gateway Subnet maskPort numbers already used 20, 21, 23, 25, 42, 53, 67, 68  Access interval  Password 0 to 32 half-size charactersDdns screen  Host name 1 to 64 half-size characters Community 0 to 32 half-size characters Snmp screen Location 0 to 32 half-size characters  Contact 0 to 255 half-size characters Error description QqMaintenanceSystem log screen  Time & dateUpgrade screen Enter the software version in the xxxxx part  Reset to the default Except the network settings Default reset screen Load the default Html files setup menu  Reset to the default and load the default Html filesBack up screen  Download Upload Other screen NTP-related error displays DDNS-related error displaysLogin-related displays Category Display Description of errorLimiters WwSetting the limiters Setting/releasing the limitersWwBasic limiter operations Press one of the CAM1 to CAM4 buttons to select the unitWwReleasing the limiters WwResetting the limitersPp Releasing the upper limit position of the movement range Pp Releasing the lower limit position of the movement rangeSafe mode WwConcerning the safe modeTrouble-triggered safe mode CPU WwSystem requirements for a PCWwPrecautions when using Windows Vista SymptomSolution Symptom QqRestrictions Restriction When activating audio on the web browserWwPrecautions when using Windows Restriction 2 When using Windows 7 with some products Restriction 1 On the setup pages for some productsPanasonic Solutions Company
Related manuals
Manual 90 pages 45.33 Kb

AWHE50SN, AWHE50HN specifications

The Panasonic AW-HE50HN is a state-of-the-art PTZ (Pan-Tilt-Zoom) camera designed for professional video production and broadcasting. This versatile camera is favored for its compact design and advanced features, making it an excellent choice for a variety of applications such as live events, education, houses of worship, and corporate environments.

One of the primary highlights of the AW-HE50HN is its impressive imaging capabilities. Equipped with a 1/2.3-inch sensor, it delivers high-definition video quality up to 1080p with a remarkable dynamic range. The camera features a powerful 20x optical zoom lens that allows users to capture distant subjects with clarity while maintaining the quality of the image. This feature is particularly valuable in large venues where the camera might be located far from the action.

The AW-HE50HN also stands out for its superb low-light performance. With a minimum illumination requirement of just 1.6 lux in color mode and 0.3 lux in black and white mode, this camera excels in dimly lit environments, ensuring that every important moment is recorded in high detail.

Networking capabilities are another key aspect of the AW-HE50HN. It supports various streaming protocols, including RTSP and RTMP, allowing for seamless integration into existing networks. This feature makes it ideal for live streaming events directly to the web or for remote monitoring via IP networks. Additionally, the camera can be controlled remotely, offering great flexibility for operators managing multiple cameras during broadcasts.

In terms of usability, the AW-HE50HN is designed with real-time control in mind. It includes multiple control interfaces such as RS-232, RS-422, and LAN, giving operators the freedom to choose the best method for their setup. The camera’s robust built-in protocols ensure compatibility with a variety of third-party controllers, making it a versatile addition to any video production setup.

The AW-HE50HN also boasts a number of special features, including face detection technology and various image stabilization options, which help enhance production quality. Its compact and lightweight design allows for easy installation in any environment, whether it's mounted on a wall, placed on a tripod, or integrated into a more complex studio setup.

In conclusion, the Panasonic AW-HE50HN is a sophisticated and adaptable camera that combines advanced imaging technology with versatile connectivity and remote control options. Its ability to deliver high-quality video in diverse lighting conditions, along with its ease of integration into video production workflows, makes it a preferred choice for professionals in the field. Whether for broadcasting, live events, or corporate use, the AW-HE50HN stands out as a reliable and powerful solution.
Top Page Image Contents