Panasonic AWHE50HN, AWHE50SN manual Host auth. screen  Host auth,  IP address,  Host check

Web setting screen

Host auth. screen

Host auth.

<Initial setting: Off>

Host authorization is set to “On” or “Off” here.

IP address

<Initial setting: blank>

The IP address of the PC from which access to the camera is allowed is input here.

The host name cannot be input as the IP address.

Access level

<Initial setting: 2. Camera control>

Select one of the following settings as the host access level.

1.Administrator

2.Camera control

For details on the access level, refer to page 66.

ppWhen the “IP address/subnet mask length” is input, the PCs which are allowed to access the camera can be restricted on a subnet by subnet basis.

If, for instance, “192.168.0.1/24” has been input and the “2. Camera control” setting has been selected as the access level setting, the PCs from “192.168.0.0” to

“192.168.0.255” will be able to access the camera at the “2. Camera control” access level.

ppWhen an already registered IP address is input and the Set button is clicked, the host information will be overwritten.

Host check

A pull‑down menu can be opened here, and the IP addresses of the registered hosts checked.

A host is indicated in the form of “Registered IP address [Access level]”.

(Example: 192.168.0.21 [1])

To delete a registered host (IP address), select the host to be deleted, and click the Delete button on the right.

67