SECTION
6.Attach oxygen tubing from the humidifier bottle to oxygen outlet connector on the oxygen concentrator.
7.Attach the cannula/patient supply tubing to the humidifier bottle outlet.
8.After assembly, ensure that oxygen is flowing through the cannula.
9.Replace the filter access door on the side of concentrator by snapping it back into the plate groove.
Oxygen Outlet
OxygenConnector
Tubing
Humidifier Outlet
FIGURE 5.4 Attaching the Oxygen Tubing
WARNING
For optimum performance, Invacare recommends that each concentrator be on and running for a minimum of 30 minutes at a time. Shorter periods of operation may reduce maximum product life.
Power Switch
NOTE: For this procedure, refer to FIGURE 5.5 on page 24.
1.Press power switch to on position. All the panel lights and the audible alarm will come on for one second, indicating that the unit is functioning properly.
Part No 1134866 | 23 | Platinum™ |