SECTION
3.Insert a flathead screwdriver in the plate groove on the top edge of the filter access door and gently pry the filter access door off (FIGURE 6.2).
4.Pull up and remove the humidifier bottle adapter (FIGURE 6.2).
5.Replace the filter access door and install the air scoop onto the filter access door by inserting the six tabs on the air scoop into the six slots on the sides of the filter access door.
Insert Flat | Humidifier Bottle | |
Adapter | ||
Head | ||
| ||
Screwdriver | Filter Access | |
Here | ||
Door | ||
| ||
| Cabinet Filter | |
| Air Scoop | |
| Slots |
Tabs
FIGURE 6.2 Humidifer Bottle Adapter
6.Attach the humidifier bottle adapter to the humidifier bottle by turning the wing nut on the humidifier bottle counterclockwise until it is securely fastened. See Detail “A” in FIGURE 6.3.
7.Place the humidifier bottle/adapter assembly in the humidifier compartment on the concentrator. See Detail “B” in FIGURE 6.3.
8.Attach oxygen tubing from the humidifier bottle/adapter assembly to oxygen outlet connector on the concentrator. See Detail “B” in FIGURE 6.3.
9.Attach the cannula/patient supply tubing to the humidifier bottle outlet. See Detail “B” in FIGURE 6.3.
Part No 1150713 | 19 | Perfecto2™Series |