SECTION
Radio Frequency Interference
This equipment has been tested and found to comply with EMC limits specified by IEC/EN 60601‐1‐2. These limits are designed to provide a reasonable protection against electromagnetic interference in a typical medical installation.
Other devices may experience interference from even the low levels of electromagnetic emissions permitted by the above standards. To determine if the emissions from the Perfecto2 is causing the interference, turn the Perfecto2 Off. If the interference with the other device(s) stops, then the Perfecto2 is causing the interference. In such rare cases, interference may be reduced or corrected by one of the following measures:
•Reposition, relocate, or increase the separation between the equipment.
•Connect the equipment into an outlet on a circuit different from that to which the other device(s) is connected.
Avoid creation of any spark near medical oxygen equipment. This includes sparks from static electricity created by any type of friction.
Part No 1150713 | 9 | Perfecto2™Series |