EDITING KNOBS & FADERS
The knobs and faders on the MPD26 can be set to transmit Control Change or Aftertouch information. In addition, the endless knobs may also be assigned as an Increment/Decrement function. The default operation of knobs and faders is to transmit Control Change information.
What is Control Change?
Control Change refers to the use of MIDI Continuous Controller data. Continuous Controller
(CC)data are MIDI messages capable of transmitting a range of values, usually
What is Aftertouch?
Aftertouch refers to MIDI data sent when pressure is applied to a pad after it has been struck and while it is being held down. Aftertouch is often used to control vibrato, volume, and other parameters.
SELECT EVENT TYPE IN THIS FIELD.
1.Press [EDIT] to enter EDIT MODE.
2.Move the fader or turn the knob.
3.On Page 1, turn the [VALUE] dial to select ‘CTRL CHANGE’ (Control Change) or ‘AFTERTOUCH’ as the event type.
4.Press [ENTER] to view Page 2.
Depending on which event type you select on Page 1, parameter options on Page 2 will be different.
5.Use [<] and [>] to move through fields on the second page.
The parameter fields available for each event type are outlined in the following pages.
12