GLOBAL MODE
In Global Mode, you can send global messages and make general changes to the way that your MPD26 functions. Global Mode options are organized under different pages and include the list of options shown below.
NAVIGATING GLOBAL MODE
1.Press [GLOBAL] to enter Global Mode.
2.Use [<] and [>] to navigate through the available pages of options (shown below).
3.Use the [VALUE] dial to change settings, values or select a message on the selected page.
4.Press [ENTER] to accept the change or send a message or press [<] to cancel.
| KILL MIDI | Send an All Notes Off or Reset Controllers message |
| Page 1 |
| |
| MIDI COMMON CHANNEL |
| Select which MIDI channel will be used as the |
| Page 2 |
|
|
| Common Channel. |
|
| ||
|
|
|
|
|
| |
| LCD CONTRAST | Adjust the contrast of the display. |
| Page 3 |
| |
| PAD SENSITIVITY | Adjust how sensitive the pads are to the touch. |
| Page 4 |
| |
| PAD VELOCITY CURVE |
| Adjust how the pads will output MIDI velocity, based |
| Page 5 |
|
|
| on the force applied to them. |
|
| ||
|
|
|
|
|
| |
| PAD THRESHOLD |
| Adjust the threshold of minimum force required to |
| Page 6 |
|
|
| activate a pad. |
|
| ||
|
|
|
|
|
| |
| MIDI CLOCK | Select Internal or External MIDI Clock source. |
| Page 7 |
| |
| TAP TEMPO AVERAGE |
| Select the number of taps to be averaged in |
| Page 8 |
|
|
| determining tempo. |
|
| ||
|
|
|
|
|
| |
| SAVE SETUP | Save the current global settings. |
| Page 9 |
| |
| SYSEX TX | Transfer a Preset via SysEx. |
| Page 10 |
| |
| VERSION | Check the current firmware version. |
| Page 11 |
| |
|
|
|
|
|
|
|
20