INCREMENT/DECREMENT PARAMETERS (knobs only)
The endless knobs on the MPD26 may also be used as an increment/decrement NRPN function. This allows you to use the knob to increment and decrement through parameters as opposed to sending an absolute value. Please note that the implementation of NRPN functions depends strictly on the software with which you will be using the MPD26. Consult your software’s documentation to find out how NRPN functions are supported.
MIDI CHANNEL FIELD
MIDI PORT/CHANNEL FIELD
This field sets the MIDI Port and Channel which the knob will use to transmit messages. You can assign the knobs to one of two MIDI Ports, A or B, and to one of 16 MIDI Channels on each port (i.e. A14). You can also assign knobs to use the MIDI Common Channel.
1.Press [<] to select MIDI Port/Channel field.
2.While in MIDI Port/Channel field, use [VALUE] dial to select desired MIDI Port and Channel.
3.Press [>] to select the next field.
Note: When not used via USB, only knobs assigned to port A will be transmitted via the
BANK M FIELD
Bank M describes the Most Significant Byte (MSB) of information.
1.Use [<] or [>] buttons to select Bank M field.
2.While in Bank M field, use [VALUE] dial to select desired value.
3.Use the [>] button to select the next field.
BANK M FIELD
BANK L FIELD
Bank L describes the Least Significant Byte (LSB) of information.
1.Use the [<] or [>] buttons to select Bank L field.
2.While in Bank L field, use [VALUE] dial to select desired value.
BANK L FIELD
When finished editing, press [ENTER] to save or [<] to cancel the changes.
15