Setting Personal Data

To measure Body Composition, your personal data must be set. Your personal data includes your age, gender and height. The Full Body Sensor Body Composition Monitor and Scale provides two options to enter your personal data.

1)Select a personal profile number to save your personal data. The monitor saves up to 4 personal profiles. Select a number 1 through 4. Use this number to enter your personal data when taking a measurement.

2)Select the Guest mode if you do not want to store your personal data in the unit. When you use the Guest mode you will need to enter your personal data each time you take a measurement.

Buttons Used in this Procedure

SET/MODE Button

Use this button to confirm the personal data and move to the next item after confirming the set item.

DOWN Button

Press this button to go back one. Press continuously to rapidly decrease.

USER Button

Press this button to select your personal profile number.

UP Button

Press this button to advance one. Press continuously to rapidly advance.

1. Press the Power Switch to turn the monitor ON.

The CAL symbol blinks on the display, then the display changes to 0.0 lb.

Wait until 0.0 lb appears on the display.

2. Lift the Display Unit out of the Display Unit Holder.

NOTE: This monitor can be set to either the US or Metric System. Personal Profile and results will be displayed by selected system. To change the US/Metric mode:

1) Press and hold the DOWN button until “lb” and “kg” blink on the display.

2)Press the DOWN button to select the mode, “lb” or “kg”.

This will automatically change “cm” and “feet/inch” under height setting.

3)Press the SET/MODE button to confirm the change.