Omron Healthcare HBF-510 instruction manual Troubleshooting Tips, Problem Cause and Solution

Page 30

TROUBLESHOOTING TIPS

PROBLEM

CAUSE AND SOLUTION

 

 

Low Battery Indicator

Check the battery installation for proper placement

No power

of the battery polarities.

No display appears on the unit

Replace all four worn batteries.

 

 

The weight value is displayed abnormally low or

Place the monitor on a hard and level floor.

high.

 

 

 

The Body Composition value is displayed

Refer to RECOMMENDED MEASUREMENT

TIMES on pages 11 and 12.

abnormally low or high.

Check the settings entered for your personal data.

 

 

 

 

Remove the batteries. Wait one minute.

Other conditions

Reinstall the batteries. Refer to BATTERY

 

INSTALLATION on page 16.

 

 

30

Image 30
Contents Full Body Sensor Body Composition Monitor Scale Table of Contents Introduction Date Purchased Serial NumberSafety Information Operating the DeviceCare and Maintenance Information on Body Composition Principles of Full Body Sensing CalculationsBody Mass Index Body FATVisceral FAT Normal + High ++ Very HighSkeletal Muscle LONG-TERM Planning for Successful Weight Loss 170 160 150Recommended Measurement Times Avoid Taking Measurements Under the Following ConditionsResults may differ from actual body fat percentage Know Your Unit Display UnitKnow Your Unit Using the Display Unit Power SwitchInstall 4 AA size batteries so the + Battery InstallationLocate the Battery Cover on the back Replace the battery coverBattery Replacement Setting Personal Data Press the Power Switch to turn the monitor onLift the Display Unit out of the Display Unit Holder Select a Personal Profile Number or the Guest mode Enter your Personal DataSetting the Gender Changing Personal DataRefer to on pages 19 and 20 to enter your personal Data Deleting Personal DataSelect the Personal Profile Number you want to change Select the Personal Profile Number you want to deleteHOW to Take a Measurement Correct Posture for MeasurementHOW to Measure Body Composition How to Hold the Grip ElectrodesPress the Guest button while holding the Display Unit Start the measurement Press the SET/MODE button to check the measurement results Understanding Your Measurement Results HOW to Measure Weight only Step onto the Measurement PlatformCheck the measurement result Error Indicators Error Cause Correction DisplayTroubleshooting Tips Problem Cause and SolutionCare and Maintenance FCC Statement Warranty Limited WarrantySpecifications BMI