Precor EFX 532 owner manual No pedaling Is detected, It ends, Press Reset, Time out

C O M M E R C I A L P R O D U C T S D I V I S I O N

In Pause
mode, you	This is what happens...,

resume pedaling Returns to the course and workout statistics continue from where you left off.

press Reset Exits Pause mode and returns to the Precor banner.

exceed time limit The EFX exits Pause mode, resets the displays, and returns to the Precor banner.

Note: The factory setting for Pause mode is 2 minutes (120 seconds). The club has the option to change the setting. A duration can be set between 1 and 120 seconds and limits how long a user can pause his or her workout. Refer to Club Information on page 16.

In Cool down,
mode	This is what happens...,
no pedaling
is detected.	Enter Cool-down, Pause mode. Time stops accruing, but
	the display features remain, so you can review your workout
	statistics. Note that the Pause mode has a time limit and
	the club has the option to determine the setting. If you
	enter Pause mode, it is of limited duration. Check with club
	personnel or refer to Club Information on page 16.

you press Reset Exits Cool-down and returns to the Precor banner.

it ends.	Displays the FINAL banner.
At FINAL
banner, you	This is what happens,...
press Reset	Returns to the Precor banner.
Time out	When you complete the 5-minute cool down period, the
	FINAL banner appears. Workout statistics except TIME,
	STRIDES and CALORIES reset to zero. (Note that the TIME
	display shows the accumulated workout time including
	warm-up and cool down periods.) You are given 2 minutes
	to review your workout statistics before the display auto-
	matically resets to the Precor banner. You can also press
	Reset, to return to the Precor banner.

page 28