A&D FS-15Ki, FS-30Ki, FS-6Ki manual 0097985, Calibration using a weight

Page 24

10. CALIBRATION

This function adjusts the scale for accurate weighing.

 

Calibrate the scale in the following cases.

Calibration (CAL) switch

‰When the scale is first used.

‰When the scale has bee moved.

‰When the ambient environment has changed.

‰For regular calibration.

Loose the lock screws on the rear side of the display pod, and remove the CAL switch cover. Then, there is a calibration switch inside.

CAL switch cover

10-1. Calibration using a weight

1. Warm up the scale for at least half an hour with nothing on the weighing pan.

‰Change Function setting “F1” or place something on the pan to disable the auto power-off function.

2. Press and hold the calibration (CAL) switch until

-00Cal00

 

Cal

appears, and release the switch.

 

 

‰Press and hold the 0 key for about 5 seconds, then you can also enter the calibration mode.

‰Press the ON/OFF without calibration.

key or CAL switch to exit

3.Press the ENT key, then the gravity acceleration value will be displayed.

‰It is not necessary to set the gravity acceleration value when calibrating the scale with a calibration weight at the place where it is to be used. (See the next section about the gravity acceleration correction.)

4.Press the ENT key, then the Cal 0 will be displayed.

5.Make sure that there is nothing on the weighing pan, and wait until the STABLE annunciator turns on.

-0097985.

-00Cal00

6.Press the ENT key. The scale calibrate the zero point, and the display shows “5pn 1” and the weight value to calibrate (SPAN calibration).

‰The weight value is equal to the capacity. When you enter with “kg” or “g” mode, then the value is “kg”. Entering with “lb” or “oz”, then “lb”.

-05pn010 -0003000.

‰If you do not need SPAN calibration, turn the power off to exit from the calibration procedure.

22

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Check Weighing Scales This Manual and Marks Contents Compliance Compliance with FCC rulesClassification of protection provided by enclosures NSF listedDisplay pod Main power cord IntroductionUnpacking Weighing pan Base unitPrecautions for Installing the Scale Precautions for Operating the ScalePrecautions for Storing the Scale Setting UP Installing the scaleAttaching a display pod to the display support column Names and Functions Weight Data Display Description of Key Operations ON/OFF Key Zero / ± KeyTare Key PT KeyStore / 4 Key DISP. / 3 KeyUnits / 1 Key Print / ENT KeyTurning the power on and OFF Basic OperationSelecting a weighing unit Basic operationWeighing with Preset Tare To Clear a Tare WeightEither Weight display resolution Simplified operation modeLCD backlight F14-1Target weight setting mode Check WeighingSetting the target weight by sample Setting the target weight by keySetting the HI limit weight and LO limit weight 000000 003000 5tored 003500Setting the HI limit % and LO limit % 5tored 000030000150 000100 5toredUpper & Lower limits weight setting mode Setting the upper HI limit weight and lower LO limit weight002340 003050 5tored 003560 002950F5d-00 F5d-06 5tored Comparator memoryFrd-00 -frd-03 Recalling a set of limits from memorySelecting a display mode Analog Sweep DisplayNET -Ż00005.00 Example of the analog sweep display00009.80 Calibration using a weight Calibration0097985 0002000 0098050Gravity acceleration correction Procedure for setting parameters FunctionsF01-01 Function list Š f 2F11 Specifications SpecificationsDimensions Gravity Acceleration MAP Values of gravity at various locationsWorld map Memo Memo

FS-15Ki, FS-6Ki, FS-30Ki specifications

A&D FS-30Ki, FS-6Ki, and FS-15Ki are high-precision digital scales designed to cater to a variety of weighing needs across different environments. Manufactured by A&D Company, Ltd., a pioneer in measurement and control technologies, these scales come equipped with a range of advanced features that enhance accuracy, usability, and durability.

The FS-30Ki is notable for its impressive capacity and precision, capable of handling weights up to 30 kilograms with a readability of 1 gram. This makes it ideal for industries such as food service, laboratory research, and logistics where precise measurements are critical. The scale also boasts a large, easy-to-read LCD display that provides clear readings, even in varying lighting conditions.

On the other hand, the FS-6Ki is designed for lighter weighing tasks, with a maximum capacity of 6 kilograms and a readability of 0.1 gram. Its compact size and lightweight design make it a perfect fit for smaller workspaces, making it suitable for craft shops, culinary applications, and healthcare settings where precise dosing is essential.

The FS-15Ki offers a middle ground, with a capacity of 15 kilograms and a readability of 0.5 grams. This versatility allows it to be utilized in diverse environments including educational institutions and industrial applications.

All three models incorporate A&D’s advanced “Easy Calibration” technology, which simplifies the calibration process, ensuring consistent accuracy over time. Additionally, they feature built-in overload protection, safeguarding the scales against damage from excessive weights.

Another significant characteristic of the FS series is their user-friendly interface, which allows for quick and easy operation. Each model includes multiple weighing modes, including tare functionality, which lets users subtract the weight of containers for net weight measurements.

These scales are also designed for durability, featuring a solid construction that can withstand everyday use in various settings, from bustling kitchens to laboratories. The scales are powered by AC power or batteries, allowing for versatile placement and portability.

In summary, A&D FS-30Ki, FS-6Ki, and FS-15Ki scales are an excellent investment for professionals demanding reliability and precision in their weighing tasks. Their combined features of ease of use, advanced technology, and robust design make them suitable choices for a wide range of applications.
Top Page Image Contents