3. Press the
ENT
key to store the HI limit weight in memory.
4.The display shows 5tored for a few seconds and returns to weighing mode.
5.Press the LO key and the last LO limit weight entered will flash.
-5tored
-003560.
6. Enter the LO limit weight via the |
|
If you hit the wrong key, press the C key and the LO |
limit weight is
You can enter minus value using the key toggles the sign.
±
key. This
7. Press the
ENT
key to set the LO limit weight in memory.
8.The display shows 5tored returns to weighing mode.
Example:
for a few seconds and | |
|
Upper (HI) limit weight: 3.050 kg, Lower (LO) limit weight: 2.950 kg
Then,
LO: weight < 2.950 kg
OK: 2.950 kg weight 3.050 kg
HI: 3.050 kg < weight
8-3. The comparator memory
The
To use this function, the scale must not be set to the simplified operation mode.
Storing a set of limits in memory
1.Set the comparator data according to the previous sections
2.Press the STORE key. Then the display will show 5d 00 .
3.Press the memory number, for example 6.
If you stop to store, press the C key, the scale returns to the weighing mode.
4.Press the ENT key to store the data to into the memory. The display shows 5tored for a few seconds and returns to weighing mode.
-f5d-00
-f5d-06
-5tored
17