A&D FS-30Ki Compliance with FCC rules, Classification of protection provided by enclosures

Page 4

1. COMPLIANCE

Compliance with FCC rules

‰Please note that this equipment generates, uses and can radiate radio frequency energy. This equipment has been tested and has been found to comply with the limits of a Class A computing device pursuant to Subpart J of Part 15 of FCC rules. These rules are designed to provide reasonable protection against interference when equipment is operated in a commercial environment. If this unit is operated in a residential area it might cause some interference and under these circumstances the user would be required to take, at his own expense, whatever measures are necessary to eliminate the interference.

(FCC = Federal Communications Commission in the U.S.A.)

Classification of protection provided by enclosures

‰The equipment is designed to comply with the IP Code of IEC 60529. The “IP65” is explained as follows:

“IP”

International Protection.

“6”

Against ingress of solid foreign objects.

 

Dust-tight. No ingress of dust.

“5”

Against ingress of water with harmful effects.

 

Protected against water jets (no power full jets). Water projected in jets

 

against the enclosure form any direction shall have no harmful effects.

NSF listed

‰The equipment is certified and listed to NSF/ANSI Standard 169 by NSF International. NSF International evaluated the equipment and certified that it is compliant with food protection and sanitation requirements for the design, construction and materials.

2

Image 4
Contents Check Weighing Scales This Manual and Marks Contents Compliance Compliance with FCC rulesClassification of protection provided by enclosures NSF listedDisplay pod Main power cord IntroductionUnpacking Weighing pan Base unitPrecautions for Operating the Scale Precautions for Installing the ScalePrecautions for Storing the Scale Installing the scale Setting UPAttaching a display pod to the display support column Names and Functions Weight Data Display Description of Key Operations ON/OFF Key Zero / ± KeyTare Key PT KeyStore / 4 Key DISP. / 3 KeyUnits / 1 Key Print / ENT KeyTurning the power on and OFF Basic OperationSelecting a weighing unit Basic operationTo Clear a Tare Weight Weighing with Preset TareEither Weight display resolution Simplified operation modeLCD backlight F14-1Target weight setting mode Check WeighingSetting the target weight by sample Setting the target weight by keySetting the HI limit weight and LO limit weight 000000 003000 5tored 003500Setting the HI limit % and LO limit % 5tored 000030000150 000100 5toredSetting the upper HI limit weight and lower LO limit weight Upper & Lower limits weight setting mode002340 003050 5tored 003560 002950F5d-00 F5d-06 5tored Comparator memoryFrd-00 -frd-03 Recalling a set of limits from memorySelecting a display mode Analog Sweep DisplayNET -Ż00005.00 Example of the analog sweep display00009.80 Calibration Calibration using a weight0097985 0098050 0002000Gravity acceleration correction Functions Procedure for setting parametersF01-01 Function list Š f 2F11 Specifications SpecificationsDimensions Gravity Acceleration MAP Values of gravity at various locationsWorld map Memo Memo