A&D FS-30Ki, FS-15Ki, FS-6Ki Setting UP, Attaching a display pod to the display support column

Page 7

5. SETTING UP

5-1. Attaching a display pod to the display support column

1.Take out whole of the scale from the box taking care not to pull the load cell cable.

2.Remove 2 clamps and 2 M4x12 screws.

Display pod

3. Attach the display pod to the display

 

support column and tighten the

 

M4x12 screws removed at step 2.

 

4. Attach the clamps and tighten them

Clamp

after tilting the display pod where

you like to use.

M4x12 screws

‰ Put the excess part of the load cell

cable into the display support

Clamp

column

 

5-2. Installing the scale

1.Select the place for installing the scale. Refer to “Cautions for installing the scale” below.

2.Adjust the level of the base, using the spirit level and leveling feet. There is an extra foot under the display support column. Adjust this foot to reach floor after adjusting the level of the base.

3. Connect the main power cord to the outlet that has the earth wiring. You may use the earth terminal on the rear side of the display pod to ground the scale.

4.If necessary, adjust the viewing angle of the display by loosening the 2 clamps, changing the angle and re-tightening the clamps.

Earth terminal

Spirit

Clamps

Leveling foot

level

Earth

Column

terminal

support foot

 

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Check Weighing Scales This Manual and Marks Contents NSF listed ComplianceCompliance with FCC rules Classification of protection provided by enclosuresWeighing pan Base unit Display pod Main power cordIntroduction UnpackingPrecautions for Operating the Scale Precautions for Installing the ScalePrecautions for Storing the Scale Installing the scale Setting UPAttaching a display pod to the display support column Names and Functions Weight Data Display PT Key Description of Key Operations ON/OFF KeyZero / ± Key Tare KeyPrint / ENT Key Store / 4 KeyDISP. / 3 Key Units / 1 KeyBasic operation Turning the power on and OFFBasic Operation Selecting a weighing unitTo Clear a Tare Weight Weighing with Preset TareEither F14-1 Weight display resolutionSimplified operation mode LCD backlightCheck Weighing Target weight setting mode000000 003000 5tored 003500 Setting the target weight by sampleSetting the target weight by key Setting the HI limit weight and LO limit weight000100 5tored Setting the HI limit % and LO limit %5tored 000030 000150Setting the upper HI limit weight and lower LO limit weight Upper & Lower limits weight setting mode002340 003050 Comparator memory 5tored 003560002950 F5d-00 F5d-06 5toredRecalling a set of limits from memory Frd-00 -frd-03Analog Sweep Display Selecting a display modeExample of the analog sweep display NET -Ż00005.0000009.80 Calibration Calibration using a weight0097985 0098050 0002000Gravity acceleration correction Functions Procedure for setting parametersF01-01 Š f 2 Function listF11 Specifications SpecificationsDimensions Values of gravity at various locations Gravity Acceleration MAPWorld map Memo Memo

FS-15Ki, FS-6Ki, FS-30Ki specifications

A&D FS-30Ki, FS-6Ki, and FS-15Ki are high-precision digital scales designed to cater to a variety of weighing needs across different environments. Manufactured by A&D Company, Ltd., a pioneer in measurement and control technologies, these scales come equipped with a range of advanced features that enhance accuracy, usability, and durability.

The FS-30Ki is notable for its impressive capacity and precision, capable of handling weights up to 30 kilograms with a readability of 1 gram. This makes it ideal for industries such as food service, laboratory research, and logistics where precise measurements are critical. The scale also boasts a large, easy-to-read LCD display that provides clear readings, even in varying lighting conditions.

On the other hand, the FS-6Ki is designed for lighter weighing tasks, with a maximum capacity of 6 kilograms and a readability of 0.1 gram. Its compact size and lightweight design make it a perfect fit for smaller workspaces, making it suitable for craft shops, culinary applications, and healthcare settings where precise dosing is essential.

The FS-15Ki offers a middle ground, with a capacity of 15 kilograms and a readability of 0.5 grams. This versatility allows it to be utilized in diverse environments including educational institutions and industrial applications.

All three models incorporate A&D’s advanced “Easy Calibration” technology, which simplifies the calibration process, ensuring consistent accuracy over time. Additionally, they feature built-in overload protection, safeguarding the scales against damage from excessive weights.

Another significant characteristic of the FS series is their user-friendly interface, which allows for quick and easy operation. Each model includes multiple weighing modes, including tare functionality, which lets users subtract the weight of containers for net weight measurements.

These scales are also designed for durability, featuring a solid construction that can withstand everyday use in various settings, from bustling kitchens to laboratories. The scales are powered by AC power or batteries, allowing for versatile placement and portability.

In summary, A&D FS-30Ki, FS-6Ki, and FS-15Ki scales are an excellent investment for professionals demanding reliability and precision in their weighing tasks. Their combined features of ease of use, advanced technology, and robust design make them suitable choices for a wide range of applications.
Top Page Image Contents