A&D FS-6Ki, FS-15Ki Introduction, Unpacking, Display pod Main power cord, Weighing pan Base unit

Page 5

2. INTRODUCTION

This manual describes how this scale works and how to get the most out of it in terms of performance.

FS-iseries check weighing scales have the following features:

The FS-iseries has three kinds of weight display resolution, 1/3,000, 1/6,000 (~1/7,500) and 1/12,000 (~1/15,000) to cover various applications.

There are 2 sizes of weighing pan. The FS-30Kihas a larger pan and the FS-6Ki / FS-15Kihas a smaller pan.

Weighing units are kg kilogram, g gram, lb pound; oz ounce; and lb-ozpound and ounce.

Waterproof to IP-65 specifications.

Constructed from stainless steel for harsh working environment.

Large liquid crystal display with back lighting and analog sweep display of 60 segments with back lighting.

Scale may be operated by AC power source or an optional SLA (sealed lead acid) battery.

Built in comparator with large and bright LED display of results.

Three colors of comparator results for better visibility.

Two modes of comparator operation, Target weight setting and Upper/Lower limits setting.

Optional serial data and comparator relay interface.

3. UNPACKING

Unpack the scale carefully and keep the packing material if you are likely to transport the scale again in the future.

When unpacking, check whether all of the following items are included:

Display pod

Main power cord

Please confirm that the main power type is correct for your local voltage and receptacle.

CAUTION

Do not pull the load cell cable.

Instruction manual

FS-iseries

Weighing pan

INSTRUCTION MANUAL

Base unit

3

Image 5

Contents Check Weighing Scales This Manual and Marks Contents Compliance with FCC rules ComplianceClassification of protection provided by enclosures NSF listedIntroduction Display pod Main power cordUnpacking Weighing pan Base unitPrecautions for Storing the Scale Precautions for Installing the ScalePrecautions for Operating the Scale Attaching a display pod to the display support column Setting UPInstalling the scale Names and Functions Weight Data Display Zero / ± Key Description of Key Operations ON/OFF KeyTare Key PT KeyDISP. / 3 Key Store / 4 KeyUnits / 1 Key Print / ENT KeyBasic Operation Turning the power on and OFFSelecting a weighing unit Basic operationEither Weighing with Preset TareTo Clear a Tare Weight Simplified operation mode Weight display resolutionLCD backlight F14-1Check Weighing Target weight setting modeSetting the target weight by key Setting the target weight by sampleSetting the HI limit weight and LO limit weight 000000 003000 5tored 0035005tored 000030 Setting the HI limit % and LO limit %000150 000100 5tored002340 003050 Upper & Lower limits weight setting modeSetting the upper HI limit weight and lower LO limit weight 002950 5tored 003560F5d-00 F5d-06 5tored Comparator memoryRecalling a set of limits from memory Frd-00 -frd-03Analog Sweep Display Selecting a display modeExample of the analog sweep display NET -Ż00005.0000009.80 0097985 Calibration using a weightCalibration Gravity acceleration correction 00020000098050 F01-01 Procedure for setting parametersFunctions Š f 2 Function listF11 Specifications SpecificationsDimensions Values of gravity at various locations Gravity Acceleration MAPWorld map Memo Memo