3. Press the
ENT
key to store the HI limit weight in memory.
4.The display shows 5tored for a few seconds and returns to weighing mode.
5.Press the LO key. Then, the last LO limit weight entered will flash and the left part of analog display turns on.
6.Enter the LO limit weight via the
If you hit the wrong key, press the C key and the LO limit weight is
You cannot enter the “+” or
-5tored -000040.
-000030.
7. Press the
ENT
key to store the LO limit weight in memory.
8.The display shows 5tored returns to weighing mode.
Example:
for a few seconds and | |
|
Target weight: 3.000 kg, HI limit weight: 0.050 kg, LO limit weight: 0.030 kg Then,
Upper limit = 3.000 kg + 0.050 kg = 3.050 kg Lower limit = 3.000 kg - 0.030 kg = 2.970 kg
LO: weight < 2.970 kg
OK: 2.970 kg weight 3.050 kg
HI: 3.050 kg < weight
Setting the HI limit % and LO limit %
Set the Function setting
1. Press the HI key. Then, the last HI limit % entered |
|
will flash and the right part of analog display turns on. |
2. Enter the HI limit % via the
If you hit the wrong key, press the C key and the old HI limit % is
You cannot enter the “+” or
3. Press the ENT key to store the HI limit % in memory.
4.The display shows 5tored for a few seconds and returns to weighing mode.
-000100.
-5tored
15