INSTALLATION INSTRUCTIONS
Read these instructions carefully and completely before | NOTE: Cosmetic damage must be reported to your |
you install the machine. The installation should be | dealer within five days from the date of pur- |
carried out by a qualified person who is familiar with all | chase. After unpacking the dryer, thoroughly |
local codes and ordinances for electrical and plumbing | check the unit for cosmetic damage. |
connections. |
|
SPECIFICATIONS
Height | Power requirement | 2800 | watts | ||
Width | For connection | ||||
Depth | Heating element | 2500 | watts | ||
Weight | 86 lbs (39 kg) | ||||
|
|
| |||
Drum material | Stainless Steel |
|
|
| |
Outer casing |
|
|
| ||
| galvanized steel |
|
|
| |
CONDENSATION DRAIN CONNECTION
Install the dryer so the condensed water will continuously flow into a drain or sink. To do this, follow the instructions below:
1.Disconnect the short hose (1) from the blue connection. (It’s okay to let the hose hang down.)
2.Connect the rubber hose supplied with the dryer to the blue nipple (2).
3.Run the hose to a drain or sink, as illustrated.
NOTE: The drain hose must not be more than 40” above the floor.
2
3
1
3
Back of dryer
LEVELING THE MACHINE
It is important that the machine is level. Each foot on the dryer is adjustable, so you can level the unit on any surface. Once it is level, securely tighten the lock nuts on the feet.
Be sure to tighten the lock nuts securely when you level the machine.
Page 4