Asko T741C important safety instructions Stacked Installation, Plastic cups

STACKED INSTALLATION

ASKO dryers can be mounted on top of any matching ASKO washer. Mounts are supplied with the machine. The metal brackets are attached to the lower back of the unit. The plastic cups are packed inside the dryer.

Two metal brackets for	Two plastic cups to
securing the dryer to the
	secure the dryer legs.
washer

To install the dryer on top of the washer, follow the steps below:

1.Remove the two outside screws (A) (20 torx) from the back of the washer and use them to secure the metal brackets (B), as illustrated below.

A

		B
Washer	back	back
		Washer

2.To ensure the dryer is correctly positioned on top of the washer, you will need to align the plastic cups with the front top edge of the washer. To position the plastic cups, break off the left tab on the cup to be placed on the right side of the washer and break off the right tab on the cup to be placed on the left side of the washer.

Plastic cups

3.Remove the protective paper from the self-adhesive surface beneath the cups. Being careful not to press the adhesive surface against the top of the washing machine, use the tabs to position the cups (as illustrated below) then press them firmly into place.

Washer front

4. Once the cups are correctly in place, break off the remaining plastic tabs.

5.Lift the dryer into position. Raising the front edge, push the dryer backwards until it engages with the brackets on the back of the washer.

6.Carefully lower the front of the dryer, making sure the feet fit into the plastic cups.

Stacked Installation

Tumble dryer

Washer

Total height 67”.

Adjustable to 69”.

WARNING!

Never stack a washer on top of a dryer!

Page 7