T741C Operating Instructions

WARNING! To reduce the risk of electric shock or injury to persons, read the ”Important Safety Instructions” section on page 2 before operating this appliance.

THE CONTROL PANEL

LED Window

Displays program number, dry time selected, remaining program time, etc.

Start Button

Press to start a program.

Power Button

Turns power to the machine on

Programs

and off.

Power Indicator Light

Glows when the power is turned on.

	Iron dry
Power	Timed dry
Power
Time set	Air fluff
Wrinkle free
Delay
Temperature
Signal
Quick cool-down

Program Knob

Turn to select a program.

Heavy

Normal

Delicate

Option Buttons	Stop Button
Press to select a	Press and hold for
program option.	approximately 3 seconds to
	cancel a program

POWER BUTTON

The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power must be on before you can start the machine.

PROGRAM KNOB

Turn this knob to select a program. The programs are described on the following page.

12:00 Position – This is where the line on the knob aligns with the line above the knob. When the knob is in this position, “00” displays on the LED to indicate no program has been chosen.

START BUTTON

After you have selected a program and the desired options, press this button to start the dryer. The red indicator light next to the Start button will come on. The indicator light will go off when the program ends or has been cancelled.

STOP BUTTON

You can stop or cancel a program by pressing and holding the Stop button until the dryer stops. When you press Start, the program will start from the beginning.

INTERRUPTING OR CANCELLING A PROGRAM

To interrupt a program, simply open the door. The dryer will stop tumbling automatically. To continue the program, close the door and press Start. The program will continue from the point it was interrupted.

To cancel a program, press and hold the Stop button

until the Stop indicator light goes off (approximately 3 seconds). You will have to reselect a program and press Start to restart the dryer.

LED WINDOW

The LED window displays the program number for the Sensidry programs, as illustrated below:

The corresponding program numbers are:

Heavy = P1	Delicate = P3
Normal = P2	Iron Dry = P4

When you select Timed Dry, the LED displays the number of minutes selected, plus the cool-down time, as illustrated below:

When you select Air Fluff, the LED displays the number of minutes selected, as illustrated above. With both programs, Timed dry and Air fluff, as the program advances, the LED displays the remaining time.

“End” on the LED indicates the program is complete. “C” indicates the program is in the cool-down cycle.

Page 11