Samsung 7100 First Digit Time, HOK Flash MAX TM, HOK Flash MIN TM, Hook OFF Time, Hook on Time

			OfficeServ 7100 Call Server Programming Guide
			(continued)
Timer Name	Default	Range Unit	Description
FIRST DIGIT TIME	10	1-250 SEC	This timer controls how long the system will
			wait for dialling to begin before dropping the
			dial tone and returning the you to error tone.
HOK FLASH MAX TM	120	20-2500	This timer monitors the duration of a hook-
		MSEC	switch flash to ensure that the flash is valid
			and not a line noise or an accidental hook-
			switch bounce LONGEST duration.
HOK FLASH MIN TM	80	20-2500	This timer monitors the duration of a hook-
		MSEC	switch flash to ensure that the flash is valid
			and not a line noise or an accidental hook-
			switch bounce SHORTEST duration.
HOOK OFF TIME	100	20-2500	This timer controls the time before dial tone is
		MSEC	sent to a single line station.
HOOK ON TIME	200	20-2500	This timer sets the minimum amount of time that
		MSEC	the system will recognize as an SLT hang up.
INQUIRY RELEASE	30	1-250 SEC	This timer monitors the duration of the interac-
			tion of the Soft button to determine when to
			return the LCD back to a normal status. This
			timer affects only display phones.
INTER DIGIT TIME	10	1-250 SEC	This timer controls the grace period between
			dialling valid digits before dropping the call
			and returning you back to error tone.
ISDN INT DGT TM	7	1-15 SEC	This timer controls the grace period between
			dialling valid digits and the end of the dialling
			string on an ISDN call.
KMMC LOCK OUT TM	30	10-50 SEC	This timer controls the grace period between
			programming actions while in a programming
			session. The timer automatically returns the sys-
			tem to secure programming status.
LCR ADVANCE TIME	5	1-250 SEC	This timer controls the time before selecting
			the next allowable route when a station is
			allowed to route advance.
LCR INTER DIGIT	5	1-250 SEC	This timer controls the grace period between
			dialling valid digits before accessing a trunk.
LONG KEY DETECT	600	0-2500	This timer controls the time a key must be held
		MSEC	down before the key press is repeated.
LONG KEY REPEAT	300	0-2500	This timer controls the time between repeated
		MSEC	digits on a long key press.
MCL DELAY TIME	4	0-9 SEC	This timer controls the time when the system
			should start transmitting Authorisation Code
			after sending MCL access code(Cable& Wire-
			less 131 access). Available in UK only.

Samsung Business Communications 2-143