Samsung 7100 manual Parameter Description Defaultms

CHAPTER 2. Ошибка! Стиль не определен.

			(continued)
No	Parameter	Description	Default
07	VERSION	WLAN module version.	Version
20	MAX AP CH.	Set the maximum channel number of AP	00
21	WLAN SWTCH	Support WLAN switch function	DISABLE

SIP PARAMETER

No	Parameter	Description	Default(ms)
0	RE-TRANS T1	When using an unreliable transmission protocol such	500
		as UDP, retransmission is required when no reply is
		received. RE-TRANS.T1 TIME is the initial retrans-
		mission interval defined in RFC2543.
1	RE-TRANS T2	Maximum retransmission interval defined in RFC	4000
		2543
2	RE-TRANS T4	RFC 2543 defines this parameter for various pur-	5000
		poses. For example, this parameter can be used as
		the time waited by User Agent Server after receiving
		ACK message in an unreliable transmission proto-
		col.
3	GEN RING TM	When using an unreliable transmission protocol, the	6000
		server cannot be sure if the client has received the
		last reply. Thus, the server must retransmit the reply
		for this length of time until it receives the requested
		retransmission. For example, this parameter can be
		used as the waiting time after sending 200 OK for
		INFO.
4	INV RING TM	When using an unreliable transmission protocol, the	1000
		client cannot verify if the server has received the
		ACK returned to the server for the INVITE Final Re-
		sponse. The client waits for this length of time after
		sending the ACK for the Final Response.
5	GEN NO RESP	Waiting time before cancelling SIP related Request.	5000
6	INV NO RESP	Waiting time before cancelling SIP INVITE Request.	6000
7	REQ	Waiting time for receiving final response for SIP re-	5000
	RETRY	lated Request.
8	PROVISIONAL	On receiving Provision Response, the User Agent	180000
		must wait for this length of time until Timeout.

DEFAULT DATA

SEE DESCRIPTION

2-326 Samsung Business Communications