Samsung OfficeServ 7100 Call Server Programming Guide

Page 361

OfficeServ 7100 Call Server Programming Guide

[838] PRIVATE IP ADDRESSES

This MMC is used to select which SYSTEM IP Address(PRIVATE or PUBLIC) is used to connect other devices via an H.323 or SIP trunk. The device that use the PRIVATE IP Ad- dress assigned in this MMC, the PRIVATE SYSTEM IP Address will be used to connect the device.

When changing IP

When changing any IP address/value, listed below, three digits must be input for each(octet) field. Example 192.168.1.10 input must be: 192 168 001 010

DEFAULT DATA

TABLE(80): 165.213.255.255

ALL OTHERS: 0.0.0.0

ACTION			DISPLAY
1)	Press Transfer button and enter 838.
		PRIVATE IP			(01)
	Display shows the first table number.	0.	0.	0.	0
2)	Enter table number(01-80) via dial keypad.
		PRIVATE IP			(01)
	OR	0.	0.	0.	0
	Press Volume button to make selection and
	press Right Soft button to move cursor.
3)	Enter IP address via dial keypad.
		PRIVATE IP			(01)
	Cursor will return to step 3.	165.213.		87.110

4)Press Transfer button to save and exit.

OR

Press Speaker button to advance to next MMC entry.

RELATED ITEMS

MMC 830	ETHERNET PARAMETERS
MMC 832	VOIP ACCESS CODE
MMC 834	H.323 OPTIONS
MMC 837	SIP OPTIONS

Samsung Business Communications

2-317

Image 361

Contents Programming Guide Copyright Trademarks Purpose Guide ContentsAudience Console Screen Output ConventionsRevision History Reference GuidesFirst Edition This page is intentionally left blank Restriction SymbolsInstruction When changing the MMC 506, 807 Before using the Auto Record featureCompliance with the National Version Standards Table of Contents MMC Programming Overview of Programming Procedure100 414 MPD/PRS Signal Assign Trunk SignalSystem Timers STATION-WIDE Timers177 Enable Technician Program TAX Rate SetupCustomer Access MMC Number Card PRE-INSTALLAbbreviation List of Figures Overview of MMC Pro Gramming 24B LCD DCS Euro Phone DCS Euro PhonesDS-5038S Phone 2 DS/ITP-5000 Series PhonesDS/ITP-5014D/5021D Phone DS-5014S/5007S Phone Using large LCD Phones Station Level Programming list Station Level ProgrammingMMC No MMC Name Station LockSystem Related MMC list Operator Level ProgrammingStation Related MMC list Trunk Related MMC list Group Related MMC list Timer and Tone Related MMC listTables, Codes, AA, Dect and VM MMC list MMC No MMC Name Tables, Codes, AA, Dect and VM MMC list Technician Level Programming list SYS. I/O ModeOptions MGI DSP OptionsAlarm Reporting Wlan ConfigurationSystem Alarm Assignments Maintenance BusyAssign ADD on Module Alphabetically arranged Programming list MMC Name MMC NoBSI RF Carrier Confirm Outgoing Call Hardware Version Display Pickup Groups System SIO Mode VoIP Access Code MMC VoIP IP Table Phone Function Program List by FunctionVoIP Function Networking FunctionLCR Function Wlan Function12 VoIP Function Programming list MMC Program No Program DescriptionAuto Attendant/Voice Mail Function Hotel Function Diagnosis FunctionPage MMC Programming ALL Stations Unlocked Station LockType Description Assign Station COS Assign COS ContentsChange User Passcode Default passcodesALL Station Passcodes None Call ForwardType STATION-WIDE Timers System TimersALL Phones Ring SET Answer ModeTo answer the C.O. call automatically Select all phones Dial 0, 1 or 2 to change ring mode Station Name Volume Up/Down keysDial Display shows Dial station number.e.g Program Buttons Station Speed DialAssign Speed Block Station Speed Dial Station Speed Dial NameKEY Extender Key Feature ExtenderCopy KEY Programming When using the Right Soft buttonStation KEY Programming System KEY ProgrammingStatus Description Station StatusAssign BOSS/SECRETARY Pickup GroupsAssign Station Group Assign Station to page ZoneDate Display Mode DescriptionCountry Western Clock 12 Hour Display Lower Case Assign Date and Time Station ON/OFF Feature Default DescriptionNot CONT.CID See Description Some Options Depend on CountryAuto ANS CO OFF Enblock 2LCD OFFAssign COS Contents Phone Ring Tone Phone VolumeFrequency Alarms are Notset Alarm Reminder ClockNotset TodayAlarm and Message View Memo Number Phone Volume Dial volume type.e.g No Messages Selected SET Programmed MessageAlarm and Message Alarm Reminder Clock Blank Message Edit Text MessageConference Group Allow Group Conference Number First Caller ID DisplayAllow Caller ID Assign Review BlockOption Description Large LCD OptionsMMC 719 Idle Display English Phone LanguageLanguage None News Display Speed Executive State Answer ModeExec State StateinRelated Items Show License Status Feature DescriptionInvalid SYSTEM-WIDE Timers DisableOpen Customer Programming Change Customer PasscodePasscode Change Customer PasscodeRing Plan Disa Alarm Alarm CLR Dect Regst Change Feature PasscodeWlan Regst Assign Disa Trunk Assign UA Device When setting the MMCCommon Bell Control Ringing Device DescriptionContinuous Common Bell ControlAssign UA Device Unassigned Assign Loud BellNo BARGE-IN BARGE-IN TypeNo BARGE-IN With ToneAssign VM/AA Port When using the MMCNormal Port 1VMAA, 0NORMALICM Ring ICM RingCO Ring Data RingMasternone Assign ADD-ON ModuleCustomer ON/OFF PER Tenant Option Default DescriptionVPN Enable OFF CancelICM EXT FWD OFF Did ERR Tone OFFSGR ALL OUT OFF CleanedChain FWD TRK Moniter OFFCO-CO TM ALL OFF Voip Realrbt OFFSmdr LOG OFF ALLDial option number.e.g Station Group Door Ring AssignmentALL Ring Plans Disa Alarm Ringing StationAuto Print OFF Traffic Report OptionDial 0 for manual or 1 for automatic print Relay Type Voice Isdn Service TypeNormal Station Extension TypeDial 0 5 to select station type Extension Type FAX PairAA Group None Message no None Group Busy None WAKE-UP AnnouncementAA Group Message noEnter the AA group number Customer ON/OFF PER Station LCR Time Table LCR Digit TableAssign Station COS Enter the next ring plan class of service.e.g No Pickup Groups Assigned Pickup GroupsKEY Extender Assign BOSS/SECRETARY Dial YES ANS YES Assign EXTENSION/TRUNK USECopy Station Usable Account Code Assign Forced CodeHOT LINE/OFF Hook Selection Assign Trunk MOH Source Assign Background Music SourceTone Assign Station MOH SourceLeast Cost Routing COS LCR Class of ServiceLCR Route Table RCV YES SND YES Allow Caller IDRCV SNDConfirm Tone Confirm Outgoing CallDisconnect Customer SET Relocation 48B 64B IDCS Allowed 12B 24B Relocate28D 18D IDCS 28DSLT Euro 6B Euro 12B Euro 24B 48B AOM 64B AOM STATION/TRUNK USE Group Copy Station UsableDial YES Assign STATION/STATION USETone Distinctive RingingCadence Dial trunk or station number.e.g MMC Branch GroupWhen using PRE FWD Busy option in MMC Preset Forward no AnswerINT EXTDial call type 0, 1 or 2.e.g Empty Calling Party NumberBRI Options PRI OptionsRingback Tone Message Customer ON/OFF PER Trunk Display show ALL Trunks CO Line Trunk LINE/PBX LineALL Trunks Dtmf Trunk Dial TypeDtmf Type Dial Pulse TypeALL Trunks F-STN Trunk Toll ClassClass Description Enter day toll class.e.g., 2 for CLS-B Station Name Trunk NameEntering Numbers Trunk CO TEL NumberTrunk Ring Assignment ALL Trunks Ring Default Operator GroupAssign Ring Plan Time Forced Trunk Release Assign Trunk MOH Source Follows Trunk Trunk Status ReadTrunk LINE/PBX Line Customer ON/OFF PER TrunkTrunk Dial Type Trunk Toll ClassALL Trunks Normal Assign Disa TrunkSignalling condition type Assign Trunk SignalImmediate Start Nonenormal 414 MPD/PRS SignalPRS MPDMMC TRUNK-WIDE TimersALL Trunks Report YES Report Trunk Abandon DataReport no Report YESCRC4 on 417 E1/PRI CRC4 OptionMode BRI and PRI Card RestartBRI Options Channel ANY YES Power Feed no Display shows first BRI channel Trunk CO TEL Number Calling Party NumberBRI & PRI Card Restart MSN DigitPRI Options PRI ModeNormal Same ConnidDial first PRI trunk number in PRI card.e.g CW YES OPT Accept MSN DigitALL Ring Plans COS Trunk COSALL TRK COS BRI S0 Mapping 423 S/T ModeTrunk BRI S0 Mapping Normal Trunk CID TrunksTrunk Gain Description Trunk Gain ControlAssign TRUNK/TRUNK USE SET H-TRK Default Data Action DisplayALL TRUNKS/ALL Dial Plans ALL Cost Rates Assigned Cost RateCosting Dial Plan Display trunk connection status Connection StatusDisplay trunk status in conference Station Status Trunk TMC Gain 437 16TRK Gain Control Default Data ActionSYSTEM-WIDE Counters Counter Default DescriptionSee Description Enter number from above list.e.g Timer Name Default Range Unit Description System TimersCO Confirm Time Display Delay TMCO-CO Disconnect Confirm Tone TMFirst Digit Time MCL Delay TimeHOK Flash MAX TM HOK Flash MIN TMMS LED on Time Power Down TimeOFF Hook Ring INT Ohva Answer TimeWhen timers value is ‘0’ See Description Some Timers Depend on CountryDisplay shows first timer value STATION-WIDE Timers Call Forward Description Range TRUNK-WIDE TimersDisa Answr Conn Delay151 MAKE/BREAK 33 Make Pulses PER Second 10 PPS Pulse MAKE/BREAK RatioMAKE/BREAK Ratio Pulse PER SecondType Description Range Assign Date and TimeTone Cadence When changing the MMCUnit milliseconds Terrupt Start Time End Time Assign Ring Plan TimeRing Plan Start None END NoneUnit Cost PER MP 0200 PENCE, Call Cost Rate 100 Percent Call CostDisplay Description Unit Cost PER MPSLI Ring Cadence 160 Interrupt LED 1000MS-ON 1000MS-OFF MSG Waiting Lamp CadenceInterrupted No Holiday Assigned Follows Ring Plan Holiday AssignmentRoom Clean Time Hotel TimerCheck OUT Time Check in END TMTone Source No YY Start END Daylight AssignmentAssign Date and Time Assign Operator Group Type 1 UCD Assign Station GroupType 2 UCD Groups Calls to a group Normal Group Dial next feature option and continue Station Group Name Trunk group Assign Trunk GroupLCR Programming No Stations Assigned Assign Station to page ZoneAssign External page Zone System 200 Entries Stations 1 Block Assigned Assign Speed BlockAssign System Speed Dial Station Speed Dial NameUCD Options Ring Next Time Final DestinationUCD Recall Time WRAP-UP TimeAlloutæfinal Auto LOG OUTAgent PIN no Group Busy NextPress Volume button to select UCD group or dial Phones 10 Bins Assign Review BlockSmdr Options Call LOG Block Allow Text Messaging Allow Group Conference ALL Stations ALL Trunks None STATION/TRUNK USE GroupAssign STATION/STATION USE Assign TRUNK/TRUNK USEMGI Group Display shows the first available option MGI User Copy COS Contents Assign COS Contents Flash YES Feature YESFOLLOW-ME YES Forward YESRNG Plan YES REM. Hold YESSecure YES SET RlocDial COS.e.g ALL Entries are SET to Toll Deny TableToll Allowance Table Toll Deny Table Entries SET to Z Entries SET to Assign Wild CharacterANS/RLS Assign System Speed DialNo Names System Speed Dial by NameAssign System Speed Dial Assign Forced Code Authorization CodeAccount Code Special Code Description Toll Pass CODE/SPECIAL Code TableToll Restriction LCR Digit 0001 Digit LCR Digit 0005 Digit LCR Digit TableLCR Time Table LCR Route Table LCR Class of Service Digit String KEY LCR Modify Digit TableOption Description Max. No. of Digit Entries NOF DEL DGTEnter digits to be appended.e.g DGT Did Number and Name TranslationPRI NameEnter valid index numbere.g., 005 via dial keypad Enter call wait option via dial keypad Leave a Message On Vacation Gone Home Programmed Station MessageNetwork Code UK LCR OptionPIN Code CCC OptionLCR Modify Digit Table UCD Options UCD Agent IDMY Area Code Idle Display Copy KEY Programming Save Station KEY Programming RestoreBOOTHHotel Feature BILLHotel FeatureStation KEY Programming Path Replacement Message CancelEasy Alarm SET to Isdn Supplementary ServiceTimer System AlarmsHeadset Mode Universal Answer Voice Mail AdministrationEnter selected station number.e.g Type of Phone Description System KEY ProgrammingBTN Sets EU 6B SetsSee Default Data in MMC Type of Dial No Description Dial Numbering PlanMGI Dial no Virt EXT Dial noIP STN Dial no Wlan Dial noChoice None Chout NoneConf Conference Conp None Connected Name Display Credit NoneRTO None Ring Plan Time Override Selfid Self System ID Reject None Ohva Reject Ring Plan RSVSee Description Feature Codes Depend on Country Dial option number to make selection.e.g Smdr Options Answer IncomingIntercom Call KEY MMC IN/OUTDial the option number.e.g System Version Display CID Translation Table Station Pair When changing the COSMMC 749, Rate Calculation Table Costing Dial PlanCost Rate ALL Cost Rates no Data Rate Calculation TableCurrency values£ or € Dial option number 0-4.e.g ALL Options are no VM Card RestartMBX Download ALL Stations YES ALL Groups no Assign MailboxAuto Record Dial VM number via dial keypad 5000 Restart VM HaltThreshold 80% VM AlarmAssign Vmmoh When the first Built-In Voice Mail port is used for VmmohNot Used IN/OUT VM IN/OUTALL Ring Plans DAY VM DAY/NIGHTCLI CLI RingingREJ Allow Caller ID No Entries Item Cost TableCode Description Enter valid code numbere.g., 02 via dial ALL Rates are % TAX Rate SetupTAX Rate ValueEnter the tax rate or value via dial keypad ALL Rates are 100% Room Cost RateSecond LCR Option Description DefaultLCR Time LCR ClassLCR Route Number PlanEnable Technician Program Change Technician Passcode Default PasscodeCustomer Access MMC Number SVMi TX Level and GainAction Display When a card is removed and a different type card is inserted Card PRE-INSTALLAre YOU SURE?NO Phone Volume Level Phone Volume Control21D Depends on Phone Typeshown for 21DProc Halt ProcessingClear Memory Reset SystemFast Restart System Restart are YOU SURE?YESSET Country Code TAX Rate Setup Hotel TimerHotel Operation FAX PairClear Mcdb Customer Database CopyCopy to Sram Copy to McdbIf you select YES, the display shows Program Download File Name Description MC File ControlPress Volume button to confirm program type Assign Network Trunk Assign System Link IDAssign Network COS Ethernet ParametersNormal Assign Network TrunkBTN SET Virtual Extension TypeLarge SET BTN LCDEnter virtual extension number Assign Network COS Dial the class of service number.01-30 Network Dial Translation Enter YES/NO to assign Mailbox to remote Assign Networking Options Dial the option number Priority 1 C1-S0 Priority 2 C1-S1 Priority 3 Self Assign System Reference ClockLAN Printer Parameters Enter type of data to be printed Parameter Description Ethernet ParametersEthernet Parameters CTI Server AddrDisplay shows the system IP address MGI Parameters IP Type Private IP only Version Card Reset noVoIP Access Code Options Voip IP TableSIP Options When changing IP Voip Access CodeVoIP IP Table TB00 ENTRY00 MMC 830 System IP Addr ALL Others Empty834 H.323 Options Parameter Description DefaultGateway Call ID Fast Setup Disable Fast Setup Enable MGI DSP Options TOS Field OutbandFAX Retry RTP CHK TMMGI Parameters 836 H.323 GK Options USE Multi E.164 GRQ SendLists GK RegisteredSIP Options Provisional Port Signal PortINV.NO Resp GEN.NOTimer 0NONE, 1UPDATE, 2REINVITE Server Registered GW ServiceSIP GW Domain315 SIP User Private IP Addresses IP Phone Information Jitter BUF UpgradeMMC 841 ITP DSP Para Down = Phone Data Time ZoneMGI User MGI GroupMGI DSP Options System IP OptionsSystem IP Options ITP DSP Para CTI Link OptionSYS Data ITP TX GAIN/HSETITP TX GAIN/MIC CommandITP RX GAIN/SPKR ITP VersShow License Status Wlan Parameters Parameter Description Defaultms When the cursor is on WLAN, press Volume button BWBS=BASIC WBS Range is 0-99900 ms.Default 6000 ms WIP Information Wlan IP/MAC List Wlan ConfigurationWIP Information Wlan IP/MAC ListWlan Configuration Enter WEP KEY values when the WBS WEP SER Only MMC Dtmfr DSP’S CID DSP’S R2MFC DSP’S Conf GROUP’S System Resource DisplayView Alarms Alarm ReportingClear Alarm BUF Print Alarm BUFEnter desired option Alarm Notification System Alarm AssignmentsCode Alarm Name Definition MJA MCP2 Error System Fault LCP/TASK Error LCP or Task Fault Code Alarm Name DefinitionDSP Error System DSP Fault Dtrk Error Isdn or E1 card Fault MGI Error MGI card Fault Minor Error Minor Fault with Alarm Buffer saving Minor Error Minor Fault without Alarm Buffer saving Maintenance Busy Alarm ReportingALL OFF ALL Idle Maintenance BusyDisplay shows busy functions No Diagnostic Time SET Diagnostic TimeNnnn Tech Programming LogsLAN Type Range Virtual Cabinet SETMMC 724 Number Plab MMC 822 VIR.EXT Type Only MMC Hardware Version DisplayMP Card System Options Auto Update Time System Speed Dial Assign Speed Dial BlockNode Info Access NUMTEL Number MAX CountInitialize Port ACD AAAALG AMEDect DaslDhcp DpimIpdc IPCIPM IP-SCPPAT OPXPBA PCBSmdr SLISmtp STAWIM WANWLI Programming Guide

Related manuals

Manual 77 pages 9.02 Kb