Samsung 7100 manual 836 H.323 GK Options

CHAPTER 2. Ошибка! Стиль не определен.

[836] H.323 GK OPTIONS

Provides a means to set the H.323 gatekeeper parameters for an optional, external industry- standard H.323 network gatekeeper, using Registration, Admissions and Status signalling (RAS). The settings apply system wide.

When changing IP

When changing any IP address/value, listed below, three digits must be input for each(octet) field. Example 192.168.1.10 input must be: 192 168 001 010

No	Parameter	Description	Default
00	GK CONNECTION	This enables the H.323 call to connect to a gate-	DISABLE
		keeper.
01	GK ROUTING	This enables routing of calls through a gatekeeper.	DISABLE
02	GK IP ADDRESS	This is the gatekeeper’s IP address.	0.0.0.0
03	GK NAME	This is the alphanumeric identifier of the gate-	‘Gatekeeper’
		keeper.(Up to 16 characters.)
04	ALTER GK IP ADDR	This provides an alternate gatekeeper address.	0.0.0.0
05	H.323 GATEWAY ID	This is the H.323 identifier used by the MGI when	‘OfficeServ’
		registering with the gatekeeper.(Up to 32 charac-
		ters.)
06	E.164 GATEWAY	This is the E.164 identifier used by the H.323 trunk	1234
	NO	when registering with the gatekeeper.(Up to 16
		digits long.)
07	GK KEEP ALIVE	This is the timer that the MGI uses to acknowledge	0 SEC
		the presence of the gatekeeper. The range is
		000~999 seconds.
08	GK DOWN ROUTE	This provides an alternate route if the primary gate-	PSTN
		keeper is down. Selections are PSTN or ALTER
		GK.
09	GK RAS TYPE	Select if AUTO or MANUAL, depending on your	AUTO
		gatekeeper’s capabilities.
10	URQ REASON	Select ON or OFF for use of Un-register Request	ON
	MODE	RAS(URQ) messages.
12	RRQ FAIL TIME	Programs the time frame to re-send Registration	30 seconds
		Request RAS(RRQ) messages to a gatekeeper.
		The range is 1~99.

2-310 Samsung Business Communications