Braun 604XD, 604XC, 604XB, 855RH, 603E, 603A Pre-Lift Operation Notes, Keep Clear of Moving Parts

Page 9

Lift Operation Safety

Lift Operation Safety Precautions (continued)

WARNING Keep clear of any hydraulic leak.

WARNING Failure to follow these safety precautions may result in serious bodily injury and/or property damage.

Pre-Lift Operation Notes

WARNING

Read and become familiar with all lift operation safety precautions, pre-lift operation notes, operating instructions and manual operating instructions prior to operating the lift. If this information is not fully understood, contact The Braun Corporation immedi- ately. Failure to do so may result in serious

UVL® series lift models provide fully automatic operation of all lift functions as well as optional automatic door operators (if so equipped). It is the responsibil- ity of the lift operator to prop- erly activate all lift functions.

Read and become familiar with all Lift Operation Safety Precautions, Pre-Lift Operation Notes, Lift Operating Instructions and Manual Operating Instructions before attempting lift operating procedures. Contact The Braun Corporation immediately if any of

this information is not understood. Call 1-800-THE LIFT. The lift owner's manual must be stored in the lift vehicle at all times.

General Safety: The lift operator (attendant) and bystanders must keep clear of the area in which the lift operates and clear of all moving parts. Stand clear of doors, stepwell and platform during lift operation. The lift occupant must keep hands, arms and all other body parts within the lift occupant area and clear of moving parts.

bodily injury and/or property damage.

DANGER

KEEP CLEAR OF MOVING PARTS

81819

WARNING

Discontinue lift use immediately if any lift component does not operate properly. Failure to do so may result in serious bodily injury and/or property damage.

Become familiar with all platform features and the proper operation of the platform components before attempting lift operation. Refer to Lift Terminology on pages 2-4 for identification of and description of specific lift compo- nents if not clearly depicted in this section. Contact The Braun Corporation at 1-800-THE LIFT immediately if any of this informa- tion is not understood.

Outboard Roll Stop: The outboard roll stop is the automatic electric actuator-activated outer barrier that provides a ramp for wheelchair loading and unloading at ground level.

From ground level, the LIFT UP function switch automatically raises (rotates) the actuator- activated roll stop to the upright (vertical) position before the

Page 7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents UVL Congratulations Warranty/Registration InstructionsTable of Contents UVL600 Series Lift Terminology Illustration Lift TerminologyDirection Lift Terminology DescriptionLift Components Lift Operation Safety Safety SymbolsLift Operation Safety Precautions Lift Operation Safety Keep Clear of Moving Parts Pre-Lift Operation NotesFully-Folded Up-vertical Wheelchair-equipped Occupant Lift Operating Instructions Control Switch Functions Lift Control SwitchesVertical Bridge Plate Engagement Manual Bridge Plate Operating InstructionsDual Manual Fold P Handrail Instructions Dual Stationary Handrail InstructionsDual Manual Fold U Handrail with Shield Instructions To Deploy HandrailsTo Stow Handrails Operation Safety Precautions at all times Manual Operating InstructionsCable-Activated Platform Manual Release System Read warning posted above To Manually Move Platform Out Extend From Stow PositionRead warning posted above! Before raising or lowering Release Valve To Manually Raise Platform To Floor LevelOpen Close Turn Outboard Roll Stop Manual OperationTo Reengage Outboard Roll Stop To Manually Lower Outboard Roll StopHandrails and Bridge Maintenance and LubricationDamage DecalsReturn Authorization Procedure Warranty/Registration InstructionsLift Model No.Lift Serial No Lift Series NoProviding Access to the World Braun UVL Series
Top Page Image Contents