Bayer HealthCare 2 manual Push Out Test Strip

Page 15

Then insert the lancet firmly until it comes to a full stop. This will “cock” the device.

4.Twist off the lancet cap and replace the endcap.

Push Out Test Strip

5.Your Breeze Meter uses a special, easy-to-use “Pull and Push” design.

Here’s how it works:

Hold the meter comfortably in one hand. Firmly grasp the meter handle with the other hand (shown here). Now, just “Pull and Push”—“Pull” the handle out until it stops and “Push” it back in until it stops again.

Helpful Hint: There is no need to turn the meter on— just “Pull and Push.”

www.ascensia.ca

Image 15

Contents User Guide As Easy as Table of Contents Technical Information Introduction Look at Your Breeze Meter Down Buttons Explanation of Display Symbols Here is what each display element means TEstIng matErIals Open Test Disc Package Open Meter Close Meter Insert DiscCounting the Number of Strips Left Prepare Lancing Device RunnIng a Blood glucosE tEstPush Out Test Strip Stick your finger and form a small round drop of blood Test Bayer Diabetes Care Helpline Strip may not release properly Precautions Marking a Deleted Blood Test Expected Blood Glucose Values Symptoms of High or Low Blood GlucoseUnusual Test Results RunnIng a control tEst Test Marking a Control Test Page REcallIng tEst rEsults BEyond EvEryday usEViewing Your Averages Clearing Stored Test Results Setting the Time SEtuP functIonSetting the Date Page Setting the Buzzer Level Setting the Time Format 12- or 24-hour Clock Setting the Date Format TransfErrIng rEsults to a comPutEr ClEanIng your mEtEr REPlacIng thE BattEry To replace the battery, follow these steps Page Technical Information Solving Problems Troubleshooting and Error Codes What You See What It Means What You Should Do What You See What It Means What You Should Do This is a normal expected action Control solution with an acceptable Customer Service Replacement Items Lifetime Warranty Bayer Diabetes Care Helpline Manufactured for