Omega Vehicle Security HHTFO manual Getting started with FOB100-SOFT, Quick tour of FOB100-SOFT

Page 23

8 FOB100-SOFT SOFTWARE PACKAGE

The FOB100-SOFT software package option allows using your thermometer system in a highly flexible manner. The built-in functions allow for temperature displaying and data logging, as well as exporting to a variety of standard spreadsheet packages. This software supports both the FOB100 series and HHTFO101 fiber optic thermometers.

8.1 Getting started with FOB100-SOFT

FOB100-SOFT was designed to acquire temperature readings from all models of the Omega FOB100 thermometer family. This versatile software package is designed to work with Microsoft Windows operating system; to fully exploit the capabilities of FOB100-SOFT, it is recommended to use it in conjunction to commercial spreadsheet software, such as Microsoft Excel.

8.1.1 Hardware and software requirements

The following list includes the minimum requirements for running the FOB100 software:

oA Pentium class or higher CPU

oSVGA or higher resolution display system supported by Windows

o128 MB of RAM memory (operating system dependent)

oAt least 20 MB of hard disk space

oA CD disk drive (to load software) (if requested, the software can be supplied on diskettes)

oA mouse or other Windows pointing device

oA RS-232 interface (COM1 to COM32). Up to 4 thermometer units are supported, each one requiring its own COM port

oWindows 2000 or later.

8.1.2Installing FOB100-SOFT

You must have at least one, or more, properly installed FOB100 or HHTFO thermometer unit(s).

1- Start Windows, and make sure you are not running any other Windows program.

2- By inserting the CD in your computer, the SETUP application should automatically start; if not, manually start it.

3- Follow the instructions that are displayed.

4- Restart your computer.

8.2 A quick tour of FOB100-SOFT

1- Connect your FOB100 and HHTFO unit(s) to free COM port(s).

2- Start FOB100-SOFT if not already running.

3- The thermometers that are turned on and connected to your PC through a proper RS-232 connection should normally be automatically detected by FOB100-SOFT3(this process takes a few seconds, for a typical installation).

4- If a thermometer is connected after FOB100-SOFT is started, you should click the “Refresh” button so the software rescans the COM ports (1 to 32). If a thermometer is not automatically detected, make sure your RS-232 port and cable is correctly configured and that the unit is turned on.

NOTE: Some RS-232C connections may cause transmission failures. Particularly, we have experienced problems with the use of DB09 to DB25 converters and other similar so-called gender changers. Also, some USB to RS232 converter/adapter are known to cause problems; Omega offers excellent converters. Limit your cable lengths to 10 meters.

3If the automatic COM port scanning is causing problems with some of your other programs, specific COM ports can be excluded from being scanned. Refer to Section 8.5.1.3 for more information.

23

Image 23
Contents Hhtfo Page Introduction Page Introduction VDC Hhtfo product specificationsCalibration Options UnpackingQuick Introduction Installing batteriesMaking your first meaasurements Keypad operation Hhtfo Thermometer Hardware ReferennceDisplay description Logging menu Using the backlightSetup menu Format sub-menu File naming conventionRate sub-menu Enable sub-menuStarting and stopping a logging session Icon definition10 RS232 communication interface Power jackProbe connector Description Using Temperature ProbesPage RS-232 help menu Using Hyper Terminal in WindowsSerial Communication Description HHTFO101 Detailed description of RS-232 commandsHHTFO111A Typical temperature reading sequence Analog Out Description Error CodesHardware and software requirements Installing FOB100-SOFTGetting started with FOB100-SOFT Quick tour of FOB100-SOFTWorking with the Configuration Window Adjusting a temperature offset Logging temperature data to a file Acquiring and viewing temperature dataYour mouse to widen this column Displaying temperature trends Viewing temperature dataDisplaying analog values dials Displaying analog thermometersDisplaying digital values FOB100 Console Find Instruments Refresh FOB100-SOFT functionsConsole help menu File menuHelp Menu Window menu