when filled with water. Do not drop the bath on a hard surface.
GENESIS 2006: Remove all, or part of the water. The bath weighs approximately thirty (30) pounds when filled with water. Carefully remove the water bath from the device.
5.6DO NOT USE BLEACH OR HARSH CLEANERS. Depending on mineral content of water used, the bath may discolor. Proper cleansing should keep this to a minimum. Use LABath CLEANTM regularly to control bacteria, algae and turbidity. To order additional LABath CLEANTM, call GenesisBPS, LLC at
5.7Fill the bath. The maximum water level should be approximately two inches from the top of the water bath. This level will ensure that the water level will be at the slotted line on the unit when the bath is repositioned.
DON'T OVERFILL THE BATH. Add 2 ml of LABath CLEANTM each time water is changed.
DON'T USE BLEACH OR HARSH CLEANERS as this may scratch and discolor bath.
5.8To replace bath: GENTLY place the bath onto the ROCKER PIN, ensure the pin head is located in the slot of the bath. Ensure that the center of bath is positioned onto the white roller on the base plate. Hold the handle firmly on the front of the control panel. Release the clamp knob by turning it counterclockwise. Lower the unit slowly into the water.
11