Graco 225 important safety instructions Manual Conventions

Page 4

Manual Conventions

Warning

WARNING

A warning alerts you to possible serious injury or death if you do not follow instructions.

Symbols, such as fire and explosion (shown), alert you to a specific hazard and direct you to read the indi- cated hazard warnings beginning on page 4.

Manual Conventions

Caution

CAUTION

A caution alerts you to possible equipment damage or destruction if you do not follow instructions.

Note

A note indicates additional helpful information.

WARNINGS

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

Do not exceed the maximum working pressure or temperature rating of the lowest rated system component. See Technical Data in all equipment manuals.

Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all equipment manuals. Read fluid and solvent manufacturer’s warnings.

Check equipment daily. Repair or replace worn or damaged parts immediately.

Do not alter or modify equipment.

Use equipment only for its intended purpose. Call your Graco distributor for information.

For professional use only.

Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

Do not use hoses to pull equipment.

Comply with all applicable safety regulations.

PRESSURIZED EQUIPMENT HAZARD

Fluid from the gun/dispense valve, leaks, or ruptured components can splash in the eyes or on skin and cause serious injury.

Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning, checking, or servicing equipment.

Tighten all fluid connections before operating the equipment.

Check hoses, tubes, and couplings daily. Replace worn or damaged parts immediately.

4

Installation and Operation

Image 4
Contents Fire-Ball 225, 300, and 425 Oil Pumps Contents Packages Model Hose Cover/Bung Dispense AirFire-Ball 300 Packages Fire-Ball 425 PackagesManual Conventions Skin Injection Hazard Installation Mounting the Pump GroundingInstallation Installation Installation Installation Installation Mobil Mounting Mobil Mounting LayoutClosed Bung-Type-Drum Sturdi-Clamp-Mounted Pumps Operation Starting and Adjusting the PumpRelieving Pressure Parts Parts List Part No. Description QtyParts Part No. Description Dispense KITParts Includes items 2a-2d 220591 Parts No. Part No. Description Parts For 246907, 225640 Includes items 2a-2d 222066 Drum Cover 207361 12c STURDI-CLAMP Fire-Ball 300 Fire-Ball 225Fire-Ball 425 Dimensions Fire-BallGal lb drum size, cover mount Overall Length 45.6 in .8 cm Model 36.6 in .9 cm Graco Standard Warranty