Installation

16-Gallon (60 Liter) Gear Lube Dispenser

Fire-Ball 225 Model 246903

Fire-Ball 300 Model 225728

1.Assemble the base (5) as shown in FIG. 4. Place an opened 16-gallon (60 liter) drum on the base and secure it with the hold-down clamps. Tighten the hold-down clamp bolts

2.For 246903, cut the extension tube (P) at a 45° angle to a length appropriate for the size of the

DR 3d

drum. When installed, the bottom of the angle should be about 1” (25 mm) from the bottom of the drum. The down tube for 225728 is sized for the container.

3.Set the cover (4) on the drum and secure the thumbscrews (Q). Install the pump (F) on the cover

(4) with the screws (R), washers and nuts (S) pro- vided

4.Connect the hose (2a) to the pump fluid outlet (N).

3c	S

FIG. 4

Installation and Operation