Invacare CT7A user manual Stairways, Moving Up Stairs

Page 22

4

SAFETY/HANDLING OF WHEELCHAIRS

 

 

 

 

 

 

 

 

￿

WARNING

 

 

 

When lowering the front casters of the wheelchair,

 

 

 

 

Do not let the wheelchair drop the last few inches

 

 

 

 

to the ground. This could result in injury to the

 

 

 

 

occupant and/or damage to the wheelchair.

 

 

 

 

 

 

Roll the wheelchair backward and slowly lower the wheelchair in one

 

 

continuous movement. DO NOT let the wheelchair drop the last few

 

 

inches to the ground. This could result in injury to the occupant. Turn

FIGURE 3

Tipping - Curbs

the anti-tippers so the wheels are facing down.

 

 

4.6

Stairways

 

 

 

￿

WARNING

 

 

 

Extreme caution is advised when it is necessary to move an occupied or unoccupied wheelchair up or down the stairs.

Invacare recommends that, if possible, the user be removed from the wheelchair prior to moving. Invacare recommends using two assistants and making thorough preparations. Make sure to use only secure, non-detachable parts for hand-held supports.

Follow this procedure for moving the wheelchair between floors when an elevator is not available:

Moving Up Stairs

1.If necessary, rotate the anti-tippers so the wheels are facing up.

2.One assistant (positioned behind the wheelchair), securely grasps a non-removable (non-detachable) part of the wheelchair for leverage and tilts the wheelchair back to the balance point.

3.After the wheelchair has been tilted back to the balance point, the assistant behind the wheelchair backs the wheelchair up against the first step.

4.The second assistant (positioned in the front of the wheelchair), with a firm hold on a non-detachable part of the framework, lifts the wheelchair up and on to the next stair above and steadies the wheelchair as the assistant behind the wheelchair places one foot on the next stair above and repeats process.

Invacare® Crossfire™T7A Wheelchair

22

Part No 1167484

Image 22
Contents Invacare CrossfireT7A Wheelchair Invacare CrossfireT7A Wheelchair Contents Seat ANTI-TIPPER Symbols GeneralLimited Warranty General Guidelines SafetyWheelchair User Wheelchair Tie Down Restraints Stability WarningRepair and Service Information Operating InformationSeat Positioning Straps Weight TrainingTire Pressure and Information Label Locations OverviewSerial Number Label Location Component Identification Typical Product Parameters  All specifications are approximate70, 75, 80 Foldover Back UpholsteryCasters Safety/Handling of Wheelchairs Safety/Handling of WheelchairsStability and Balance SAFETY/HANDLING of Wheelchairs Reaching, Leaning and Bending Forward Lengthening Wheelbase ShorteningReaching, Leaning Backwards Reaching, Leaning Bending Forward Backwards Coping with Everyday ObstaclesTipping Tipping CurbsStairways Moving Up StairsMoving Down Stairs StairwaysEscalators Transferring To and From Other SeatsSafety Inspection Checklist Safety InspectionInspect Initially Inspect/Adjust Weekly Inspect/Adjust Monthly Inspect/Adjust PeriodicallyTroubleshooting Maintenance Maintenance Safety PrecautionsSuggested Maintenance Procedures Replacing/Repairing Caster Tire/Tube Replacing/Repairing Rear Wheel Tire/Tube Tire wear is excessive if Footrest Adjusting/Replacing Standard FootrestReplacing the Footrest Adjusting the Footrest Adjusting Footplate AngleAdjusting Footplate Depth AdjustmentsDepthInstalling the Swingaway Padded Armrest Socket ArmsRight Side Armrest Socket Left Side Armrest SocketShort Mounting Plunger Pin Adjusting Height Installing/Removing/Adjusting the Swingaway Padded ArmrestRemoving  To remove the T-arm, reverse this procedure Adjusting T-Arm HeightAdjusting T-Arm Position Back Unfolding/Folding the BackDetail a Folding the Back Detail B Unfolding the Back Detail CBack Angle Adjustment  For this procedure, refer to FigureRepeat Steps 2-6 for remaining back cane Detail Detail DThis orientation Hole in adjustmentWhen installed Square will align withOption Back Upholstery Cover Adjustable Tension Back Upholstery The back upholstery cover is designed for three reasons Adjusting the Tautness of the Back Adjustable Tension Back UpholsteryInstalling the Adjustable Tension Back Upholstery Removing the Adjustable Tension Back UpholsteryInstalling the Lumbar Strap Removing the Back Upholstery CoverDetail a Detail B Installing the Back Upholstery CoverBack Canes Removing/Installing Foldover Back Upholstery Detail ERemoving Foldover Back Upholstery Installing Foldover Back UpholsteryBack Height Adjustment Front WheelchairHole Number Back CaneRemoving/Installing the Back Frame InstallingSeat Replacing Seat UpholsterySeat Angle Adjustment Detail aSeat Angle Adjustment Invacare CrossfireT7A Wheelchair Detail aWheel Locks Replacing/Adjusting the Wheel LocksAdjusting the Wheel Lock Replacing the Wheel LockReplacing/Adjusting the Wheel Locks Changing Wheel Lock Handle PositionConverting From Pull-to-Lock to Push-to-Lock Detail a Wheel Lock in PUSH-TO-LOCK ConfigurationConfiguration Wheel LockRemoving/Installing Rear Wheels WheelsAdjusting Quick-Release Axles Removing/Installing Rear WheelsAdjusting Quad-Release Handles In and/or Out Replacing Quad-Release AxlesRemoving Play from Rear Wheels Adjusting Quad-Release Handle In and/or OutHandrim Replacement Removing Play from Rear WheelsRepairing/Replacing Rear Wheel, Tire/Tube Handrim ReplacementAdjusting Wheelbase Length, Adjusting Center of Gravity COG Adjusting Wheelbase Length, Adjusting Center Gravity COGSocket Screw Mounting Positions Front Rear WheelchairRepositioning the Camber Tube Clamps Repositioning the Camber Tube ClampsRepositioning the Camber Tube Clamp Socket Screws Reversing the Camber Tube Clamp DirectionCamber Tube Direction Facing Rear of Wheelchair OccurFacing Front of Wheelchair Adjusting Wheelbase Width Installing the Camber Tube Removing/Installing the Camber TubeRemoving the Camber Tube Detail a Correct Orientation for Each Camber Tube  Standright. behind the wheelchair to determine left or Adjusting the Camber TubeDetail a Side View Determining/Setting Toe In/Toe Out  For this procedure, refer to on page 74 and FigureTop View of Wheelchair Adjusting Fork Tension Top View of WheelchairAdjusting Fork Tension Suspension Forks Removing the Caster Removing/Installing/Repositioning the Caster AssembliesStandard Forks  One mounting screw will not turnOne Sided Fork Installing the CasterInstalling the Caster Removing the CasterRemoving Fork Assembly Removing/Installing the Fork AssemblyInstalling Fork Assembly Detail B Suspension Fork Removing/Installing the Elastomers Suspension Forks OnlyDetail a Standard Fork Detail C ONE Sided ForkInstalling the Elastomer Removing/Installing the Elastomers Suspension Forks OnlyAdjusting/Replacing Anti-tipper Anti-TipperReplacing Anti-tipper Adjusting Anti-tipperInjury or property damage Adjustment Holes Detail a ANTI-TIPPER211/8 Anti-Tipper USA Canada