Invacare CT7A Installing/Removing/Adjusting the Swingaway Padded Armrest, Adjusting Height

7ARMS

7.2Installing/Removing/Adjusting the Swingaway Padded Armrest

Installing

1.Secure mounting bolt and locknut in desired mounting hole. Tighten securely.

2.Insert swing away padded armrest into armrest socket so that notch fits around mounting bolt.

Removing

1.Remove swing away padded armrest from armrest socket.

Adjusting Height

1.Remove the swing away padded armrest from the arm socket.

2.Remove the mounting bolt and locknut mounted in the arm socket.

3.Reposition mounting bolt to one of three positions in the arm socket depending on the desired height.

4.Install locknut and securely tighten.

5.Reinstall the swing away padded armrest into the arm socket.

6.Repeat STEPS 1-5 for the opposite side, if necessary.

Swingaway Padded

Armrest

Locknut

Arm

Socket

	Three Mounting
Mounting Bolt	Positions

FIGURE 6 Installing/Removing/Adjusting the Swingaway Padded

Armrest

Invacare® Crossfire™T7A Wheelchair 38 Part No 1167484