Invacare 9000 STANDARD WEIGHT user manual Adjusting Back Height

Page 46

7SEAT AND BACK

7.3Adjusting Back Height

￿ WARNING

The seat depth, back height/angle, seat angle, size/position of the front casters, size/position of the rear wheels, anti-tipper model, as well as the user condition directly relate to the stability of the wheelchair. Any change to one or any combination of these may cause the wheelchair to decrease in stability. These adjustments must be performed by a qualified technician.

Back canes MUST be adjusted to the same height.

1.Remove the two mounting screws and locknuts that secure the two back canes to the wheelchair frame.

2.Reposition the back canes to one of the two height adjustment mounting holes.

14 inch - Mounting holes* 1 and 2

15 inch - Mounting holes* 2 and 3

Mounting holes numbered from bottom to top for reference only. (There are no numbers on the back canes or wheelchair frame.)

3.Reinstall the two allen screws and locknuts that secure the back canes to the wheelchair frame and securely tighten.

Height Adjustment

Back Cane

 

 

Mounting Holes

 

 

 

 

 

3

Wheelchair

The two mounting screws and locknuts that secure the back

2

Frame

cane to the wheelchair frame are not shown for clarity.

1

 

 

 

FIGURE 3 Adjusting Back Height

Invacare® Jymni™ Pediatric Series Wheelchair

46

Part No 1100868

Image 46
Contents Page Invacare Jymni Pediatric Series Wheelchair Contents Arms ANTI-TIPPERS/WHEEL Locks Symbols GeneralLimited Warranty Crossmember OverviewLabel Locations Lower Frame TubeModels with Quick-Release Axles Only On all adjustable Anti-tippersJymni Recliner Models Only Typical Product Parameters 35½ to 39¼ inches 19 or 23 inchesPermanent AluminumComponent Identification Front CasterSafety General GuidelinesOperating Information Anti-tippers General Warnings Hand Grips Information for Healthcare Professionals/Assistants Lifting Repair and Service InformationRamps, Slopes, Inclines and Obstacles Seat Positioning Strap Weight LimitationWeight Training Tire PressureWheelchair Tie Down Restraints Wheel LocksWheelchair User Stability and Balance Safety/Handling of WheelchairsRecliner Models Only Refer to the procedure that is checked to maintain Forward Reaching, Leaning and Bending Forward or SidewaysBackwards Method 1 Wheelchair With Step Tubes Coping With Everyday ObstaclesTipping Step TubeStairways Method 2 Wheelchair Without Step TubesMoving Up Stairs Moving Down StairsEscalators Transferring To and From Other SeatsUnfolding and Folding Wheelchair Unfolding Sling SeatFolding Sling Seat Unfolding/Folding Solid Seat Model WheelchairsSafety Inspection Checklist Safety Inspection/TroubleshootingInspect/Adjust Initially Inspect/Adjust Weekly Inspect/Adjust MonthlySolutions TroubleshootingInspect/Adjust Periodically Casters SqueaksSuggested Maintenance Procedures Maintenance Maintenance Safety PrecautionsDamage may result Replacing/Repairing Rear Wheel Tire/Tube Replacing/Repairing Caster Tire/Tube Transporting the Invacare JymniFront Riggings InstallingInstalling/Removing the Swingaway Footrest Assembly RemovingJ932A-14 Swingaway Footrest Height AdjustmentUpper Footrest Support Bolt Locknut Lower Footrest Assembly J932A and J933AJA932A-14 Elevating Legrest J934A-14 onlyJA932A J934A-14Step Installing/Removing Elevating Legrest AssemblySteps 2 Adjusting Height Lowering Legrest AssemblyAdjusting Calfpad Detail aAdjust armrest to one of five positions Adjusting Armrest HeightArms Using Swing-Back Arms Armrest Release Lever Rear Arm SocketReplacing Armrests Removing or Replacing ArmrestRemoving Armrests PostReplacing Clothing Guards Fixed Height Arms Only Guard to the armrest assemblyMounting Screws Clothing Guard Armrest Pad Assembly Converting Between Space Saver and Conventional ArmsSpace Saver Arm Position Conventional Arm PositionSeat and Back Replacing Seat UpholsteryWasher Mounting Screws Back Upholstery Back Cane Replacing Back UpholsteryBack Cane Wheelchair Frame Locknuts Mounting Screws Adjusting Back Height Cane to the wheelchair frame are not shown for clarityAdjusting Seat Width and Depth Rear Wheels Removing/Installing Rear WheelsPermanent Axles Inside Wheelchair Quick-Release AxlesDetail a Detent balls and detent pin Outside WheelchairAdjusting the Quick-Release Axle Wheelchair Frame Locknut Locking PinsReplacing Rear Wheel Handrim Replacing Rear Wheel HandrimInstalling/Replacing Front Casters and Forks Front CastersReplacing/Repairing Front Caster Tire/Tube Adjusting Front Caster MountingInstalling/Adjusting Anti-tippers Anti-tippers/Wheel LocksAnti-Tipper Release Buttons Rear Frame Tubing Installing Anti-Tippers1101959 1058752 Anti-Tipper LengthAdjusting Anti-Tippers InchesPull-To-Lock Using Patient Operated Wheel LocksPush-To-Lock Pull wheel lock handle toward the tire to engage wheel lockWheel Lock Wheel Lock Shoe Rear Wheel Adjusting Patient-Operated Wheel LocksAdjusting Patient-Operated Wheel Locks Inch 3/16-inch pneumatic tires Wheel Lock Shoe TireRecliner Operating ReclinerUpright Position Reclined PositionInstalling/Removing Headrest Extension Replacing Headrest PillowBack Upholstery Replacing Headrest/Back Upholstery Headrest UpholsteryKnob Back Upholstery Removing From Stored Position Adjusting Headrest/Back Upholstery TensionStoring/Replacing Spreader Bar Storing Spreader Bar Headrest Upholstery Spreader Bar BackPlacing In Stored Position Adjusting the Seat Width and DepthReplacing Spreader Bar Installing Telescoping I.V. Rod/O2 Holders OptionsTie Wrap CleaningDetail a I.V. Rod/O Detail B O 2 holder Holder Step Tube LocknutInstalling the 1-inch Forward Rear Wheel Positioner Wheel PositionerRepeat Steps 1-3 for the opposite stroller handle Installing/Adjusting Stroller Handles RemovingHeight Adjustment Repeat Steps 1 3 for the opposite stroller handleInstalling/Removing the Solid Back Insert Installing/Removing the Solid Seat Insert InstallingInstalling the Wheel Lock Extension Handle Invacare Jymni Pediatric Series Wheelchair Invacare Jymni Pediatric Series Wheelchair Canada One Invacare Way